The compact 150-watt Yorkville YSS2 active studio subwoofer is the ideal companion for any DAW, project or midi studio where additional bottom end in the monitoring system is required, yet space may be at a premium. Designed for easy hook-up to any source, the YSS2 offers stereo RCA In/Outs for connecting the YSS2 between mixer and active ful--range monitors. As well there are speaker push-terminal In/Outs for connecting the YSS2 between power amplifier and passive full-range monitors. In either case, the stereo inputs are internally summed to mono for the YSS2's power module but allowed to patch as stereo to the monitors.
Rear panel features on the YSS2 include a Level control, a Phase inversion switch and a 50 to 200Hz Crossover control for low-pass filter regulation of the YSS2 so that it can be matched with the natural bass-rolloff of full-range monitors. The back panel also features a 3-postion power switch with an Auto-On setting that instantly powers up the YSS2s amplifier when signal appears at either the RCA or speaker-tab inputs.
Features
10-inch, 150-watt studio subwoofer
Stereo RCA and Speaker Terminal In/Outs
Stereo inputs are summed to create a mono subwoofer mix
Stereo source input is passed through the system unaffected to the near field monitor system
Level Control
Phase Inversion switch
Sweepable low-pass filter (50 to 200Hz)
Auto-on function powers up subwoofer when receiving a signal
Specifications:
System Type - Studio Subwoofer w/down-facing driver
Active or Passive - Active
Applied Power (Watts)- 150
Max SPL (dB) - 105
Frequency Response (Hz +/- 3db) - 45-300
LF Driver - 10-inch with ceramic magnet
Power Amplifier (Watts) - 150
LF Distortion - Less than 0.05%
Power Switch - 3-position including Auto-On
Auto On - triggered by input signal, auto-standby triggered after apx. 10 min. of no input signal
Inputs - 2 x RCA (L&R) / 2 x Speaker push terminal (L&R)
Controls - Level & Low-Pass Frequency
Phase Switch - 0/180 degrees
Thru Puts - L&R RCA & Speaker push terminals configured in parallel with the Inputs
Dimensions (DWH, inches) - 15 x 14.5 x 15
Dimensions (DWH, cm) - 38 x 37 x 38
Weight (lbs/kg) - 37 / 17