Manley

The Manley Enhanced Pultec EQP-1A is based on (and improvement on) the historic Pultec Equalizer as originally produced by Pulse Techniques, Inc. It boasts a simple and clean all-tube make-up gain block to reamplify the signal after the passive EQ circuit.
The rear mounted input switch selects 0 degrees or 180 degrees PHASE INVERT for the balanced gold pin XLR input or the transformerless unbalanced bridging input (1/4" jack) may be selected in that switch's middle position.

The Manley Enhanced Pultec EQP-1A, available in both single and 2-channel versions, (this is 2-channel version) uses 1 x 12AX7WA and 1 x 6414 (or 5965) in Manley's all-tube single-ended line amplifier for the gain make-up and extra-beefy sound. Gain is factory set for unity but additional gain is available by a rear mounted feedback adjustment trimpot. Manley Pultecs offer both transformer coupled balanced and direct capacitor coupled unbalanced outputs for easy interface and sonic variety.

Manley Enhanced Pultec EQP-1A Features and Specifications:
Manley input transformer with nickel laminations potted in mu-metal case; 3K ohm input Z
PHASE REVERSE switch for balanced XLR input
Alternate transformerless 1/4" HI-Z (5K ohm) input
BYPASS switch and AUTO-MUTE w/warmup delay
Silent conductive plastic BOOST and CUT controls
Sealed gold-contact Greyhill frequency select switches
Vacuum tubes: 1 x 12AX7WA (gain) and 1 x 6414 (or 5965) White Follower
Hi-current drive <50 ohm LO-Z XLR and 1/4" outputs
Balanced Transformer-Coupled XLR Outputs via MANLEY 9611
Flat frequency response from 10Hz-70KHz
<0.01% THD @ 1Khz
S/N Ratio: 116 dB
Adjustable FEEDBACK / GAIN: Unity 5 dB
Maximum output: +30 dBv
Power consumption: 18 watts
Operating mains voltage: Units are purpose built for original destination country's mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge
Mains Voltage Frequency: 50~ 60Hz
Dimensions: 19" x 1 3/4" x 10" (occupies 1u)
Shipping weight: 12 lbs.