Description
Yorkville's Elite LS200P represents a step forward in speaker and electronic design. This ultra-compact powered subwoofer features a deep-excursion 10" low-frequency driver in a precisely tuned band-pass enclosure that ensures rock-solid low frequency output. The built-in 200-watt power module has added electronic features such as full-time, acoustically transparent limiting to let you push the sub hard without damaging distortion, and custom response optimization. Another feature - a Line/Speaker button - permits driving the LS200P with the usual line-level signals from a mixer, etc., or wiring it into your speaker system as a powered "extension sub" without either lowering the overall load impedance that the PA amp encounters or over-driving the LS200P. Parallel Input and Loop Out jacks are included to facilitate either setup or to interconnect multiple LS200Ps for larger-scale systems.
Additional features include a Level control, Ground button to defeat any possible loop hum, and a top-mounted speaker pole-stand adaptor (accepts standard 3/8" dia.stands such as the Apex SWTELETUBE1).
Specifications:
System Type - Subwoofer
Active or Passive - Active
Applied Power (Watts) - 200
Max SPL (dB) - 125
Frequency Response (Hz +/- 3db) - 50 - 110
Driver Configuration10 inch
LF Driver(s) - 10 inch, deep-excusion
LF Protection - Electronic Limiting (excursion, thermal, clip)
LF Power Amplifier (Watts) - 200
Inputs - 1/4" Jacks x 2 (Input & Link Out)
Level Control - Main Volume
Other Features - Line/Speaker input level selector and Ground selector
Corners - Black Steel
Bar Handle - 1 Side mounted
Pole Stand Adapter - 1 3/8"/3.5cm dia.
Enclosure Type - Band-Pass subwoofer
Enclosure Materials - 15mm (5/8") 11-ply Russian Birch
Grille - Heavy gauge perforated metal
Covering - Black Ozite (Carpet)
Dimensions (DWH, inches) - 27 x 17.5 x 14
Dimensions (DWH, cm) - 69 x 44 x 36
Weight (lbs/kg)- 55.1/25
Additional features include a Level control, Ground button to defeat any possible loop hum, and a top-mounted speaker pole-stand adaptor (accepts standard 3/8" dia.stands such as the Apex SWTELETUBE1).
Specifications:
System Type - Subwoofer
Active or Passive - Active
Applied Power (Watts) - 200
Max SPL (dB) - 125
Frequency Response (Hz +/- 3db) - 50 - 110
Driver Configuration10 inch
LF Driver(s) - 10 inch, deep-excusion
LF Protection - Electronic Limiting (excursion, thermal, clip)
LF Power Amplifier (Watts) - 200
Inputs - 1/4" Jacks x 2 (Input & Link Out)
Level Control - Main Volume
Other Features - Line/Speaker input level selector and Ground selector
Corners - Black Steel
Bar Handle - 1 Side mounted
Pole Stand Adapter - 1 3/8"/3.5cm dia.
Enclosure Type - Band-Pass subwoofer
Enclosure Materials - 15mm (5/8") 11-ply Russian Birch
Grille - Heavy gauge perforated metal
Covering - Black Ozite (Carpet)
Dimensions (DWH, inches) - 27 x 17.5 x 14
Dimensions (DWH, cm) - 69 x 44 x 36
Weight (lbs/kg)- 55.1/25











