Traynor

Acoustic Master Series Characteristics

Effective simplicity and precise reproduction are two of the design criteria Yorkville Sound set for this new line of Traynor Acoustic Master amplifiers. Acoustic-electric guitarists and others will be pleased at the neutral response available with minimal control adjustments. Active filtering circuits allow effective tonal shaping with fewer knobs and switches so you get the sound you want quickly, easily and without feedback.

Inside, high-grade glass epoxy circuit boards, low-noise metal film resistors and jacks with gold plated contacts ensure quiet, reliable performance onstage or in-studio. Outside you will find heavy-gauge metal speaker grilles, rugged plywood construction and distinctive Buggy Whip leatherette covering. Add rigorous factory testing and Yorkville's legendary two-year/*ten-year EVEN IF YOU BREAK IT transferable Warranty effective throughout Canada and the USA and you can be sure you've got what you need to reliably sound your best for years to come.
*Covers cabinet integrity

AM Custom Details:

Flagship of the Acoustic Master line, the AM Custom is an advanced, 3-channel mixer/amplifier/monitor designed to precisely reproduce acoustic guitar or other acoustic instruments, also vocals and line-level music sources and all in stereo. A total of 225 watts of clean power is distributed to a long-excursion 8-inch woofer and dual neodymium dome tweeters mounted on an angled internal speaker baffle for enhanced sound distribution and stereo separation.

Features also include 1/4-inch/XLR "combi" mic/line inputs with 48v Phantom power available for condenser mics on channels 2 & 3 (it does not affect dynamic mics, instruments or line inputs if you opt for them),also Insert jacks for patching outboard effects, EQ, etc. into specific channels, 4-band channel EQ's with frequency-tuneable Notch filters to control feedback, dual independent 24-bit Onboard digital Effects processors with Footswitch bypasses, an Auxilliary 1/4" input with its own Gain control for connecting a PA or recording desk monitor feed, RCA auxiliary inputs for a CD or MP3 player, and a choice of pre- and post-EQ balanced Line Outputs with a Ground Lift button to defeat loop hum.

Note: model TB1 tilt-back legs available as an accessory

Specifications:
Type - Stereo Mixer/Amp/Monitor
Total Cont. Power (Watts) - 225
Total Burst Power, 2 cycle (Watts) - 250
Bi-Amp Power (Cont.Watts) - 150/woofer, 25 each/tweeters
Speaker Complement - 8-inch 150 watt deep-excursion woofer, 2 X 1-inch Neodymium Dome Tweeters
Crossover - active @ 2.5kHz
Frequency Response (Hz +/-3dB) - 50-20k
Hum and Noise - -98dB
Channel 1 Input - 1/4-inch unbalanced, 1 meg-Ohm
Channel 1 Controls - Gain, 4 band EQ +/-15dB @ 75, 300, 1k & 7kHz, Notch -24dB steep-slope with frequency sweepable from 80 to 1kHz w/Off position, Effects Select, Modify and Mix
Channel 1 Insert - 1/4" TRS (Tip=send, Ring=return)
Channel 1 LED - Clip
Channel 2 Input - 1/4"/XLR "combi" jack with 48V Phantom power available (does not affect dynamic mics, instruments or line inputs)
Channel 2 Controls - Gain, EQ +/-15dB @ 75, 300, 1k & 7kHz, Notch -24dB steep-slope with frequency sweepable from 80 to 1kHz w/Off position, Effects Active/Defeat switch (Ch.2 shares the Ch.1 Efx processor)
Channel 2 Insert - 1/4" TRS (Tip=send, Ring=return)
Channel 2 LED - Clip
Channel 3 Input - 1/4"/XLR "combi" jack with 48V Phantom power available (does not affect dynamic mics, instruments or line inputs)
Channel 3 Controls - Gain, EQ +/-15dB @ 75, 300, 1k & 7kHz, Notch -24dB steep-slope with frequency sweepable from 80 to 1kHz w/Off position, Effects Select, Modify and Mix
Channel 3 Insert - 1/4" TRS (Tip=send, Ring=return)
Channel 3 LED - Clip
Aux. 1/4-Inch Input - bypasses the Line Outs to eliminate gain loops when used as a monitor feed input. Also accepts instrument inputs.
Aux Gain - feeds the 1/4" Aux input signals directly to the power amplifer section & is not affected by the Master volume
Aux. RCA Inputs - pre Master Volume
Master Volume - Controls all levels except 1/4" Aux.
Input Sensitivities - ch1,2,3 & Aux = 100mV
Line Outs - 1/4-inch = post-EFX, XLR = Pre-EFX
Line Out Level (incl. Insert send) - 1Vrms
Insert Return Sensitivity - 0.5Vrms
Effects Processors - 24-bit digital w/16 presets
Effects Controls - Select, Modify & Mix
Effects Footswitch - takes a 2-button switch (eg, Apex AFS2) and bypasses channel 1/2 and channel 3 processors independently
Protection - Insert Return Limiter, Clip Limiter
Cabinet Construction - 17mm muli-ply
Dimensions (DWH, inches) - 12.5 x 20 x 13
Dimensions (DWH, cm) - 50.8 x 32 x 33
Weight (lbs / kg) - 35 / 15.9