Benchmark Media Systems

A perfect choice for stereo pairs, ribbon mics, and any other application where purity is the goal.

The 2-channel Benchmark MPA1 microphone preamplifier is meticulously designed to Benchmark standards of transparency, ultra-low distortion, and ultra-low noise performance. The MPA1 mic-pre is a perfect choice for stereo pairs, ribbon mics, and any other application where audio purity is the goal.

Pristine Input Stage
The Benchmark MPA1 mic-pre's input stage offers high-voltage headroom (+29 dBu) and single-stage gain control to maximize the signal-to-noise ratio. The MPA1 maintains superb noise performance across the entire gain range (74 dB) by utilizing precision-matched, low-noise, transistor quad-arrays. A servo-controlled circuit minimizes DC-offset and maximizes headroom.

Complete Low Frequency Response
The MPA1 exhibits exceptional low-frequency performance with a clever dual-capacitor AC-coupling design. This dual-capacitor design defeats the limitations of single-capacitor AC-coupling designs, achieving an exceptionally low corner-frequency with excellent subsonic phase-accuracy.

Innovative Stepped-Resistor Gain Control
The gain control of the Benchmark MPA1 is completely unique. The gain is controlled via a 38-position, switched resistor ladder, set up in a continuously rotating orientation via relay control. This gain control circuit offers 2 dB per step, 0-74 dB of gain without attenuation, and inter-channel gain precision of +/- 0.03 dB. A make-beforebreak scheme creates a silent switching circuit.

Elegant Phantom Power Protection
The transistor stage is protected from phantom power surges with an ultra-fast, multi-stage protection circuit. This circuit utilizes the high-speed capabilities of low-capacitance Schotky diodes and the high-current capabilities of TVS diodes to absorb the phantom power surges caused by shorts and plugging/unplugging microphones with +48V on. This circuit is pre-biased so that it is isolated from the circuit in normal operation and activated when a surge occurs.
With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Benchmark MPA1 2-Channel Mic-Pre Features:

* 38-position discrete linear gain switching (2 dB/ step)
* Automatic gain-range switching with LED range-indicators
* 0 74 dB total gain range
* Switchable 40-Hz high-pass filter (relay controlled no audio through switches)
* Switchable polarity invert (relay controlled no audio through switches)
* Independently switchable +48V phantom power
* HPA2 Benchmark's signature high-current, 0 Ohm headphone amplifier
* 4-segment, precision LED meters (calibration-free)
* Recessed phantom switch to prevent accidental switching
* Phantom-power disable jumper for dedicated ribbon mic operation
* Phantom-protection circuitry prevents damage from phantom power surges
* Internal, toridal linear power supply
* High-quality gold Neutrik connectors
* Maximum input +29dBu
* Maximum output: +29dBu
* Ultra-low noise/distortion (THD+N @ 22dB Gain 10Hz-20kHz=0.00045%)
* RF-immunity over a wide bandwidth (500kHz)
* Designed, built, and tested in Syracuse, New York, USA