Opens in a new window
BOSS
Solderless Pedalboard Cable Kit w/6 Connectors, 6 ft Cable
4 models to choose from:
The BOSS Solderless Pedalboard Cable Kit is designed to save space on your pedalboard without sacrificing tone. Easy to assemble, this customizable system requires only the tightening of a single ground screw on each connector, with no cable stripping required. The compact bi-directional connectors are engineered to allow straight or right-angle connections, and enable you to place your pedals as close as 1 cm apart.
Premium 24K gold plated contacts ensure the most precise sound reproduction available. The low-capacitance, studio-grade cable is ultra-pliable for clean cable management, and is manufactured with oxygen-free copper and braided shielding for quiet operation and lasting durability.
• Solderless technology for simple and quick assembly
• Bi-directional barrel design with 24K gold-plated contacts
• Low-capacitance cable preserves your tone
• Ultra-pliable cable for easy cable management
• 2.5 mm screwdriver included
• Available kit sizes: BCK-2, BCK-6, BCK-12, BCK-24
Premium 24K gold plated contacts ensure the most precise sound reproduction available. The low-capacitance, studio-grade cable is ultra-pliable for clean cable management, and is manufactured with oxygen-free copper and braided shielding for quiet operation and lasting durability.
• Solderless technology for simple and quick assembly
• Bi-directional barrel design with 24K gold-plated contacts
• Low-capacitance cable preserves your tone
• Ultra-pliable cable for easy cable management
• 2.5 mm screwdriver included
• Available kit sizes: BCK-2, BCK-6, BCK-12, BCK-24
Q & A
There are currently no questions for this product.
Reviews
3.131.13.37
claudebot
Difficile à apprivoiser 0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Longueuil, Quebec
Il faut vraiment être patient et avoir la « twist », mais une fois installé, c’est génial.
Petit truc: se servir d’une pédale pour tenir le connecteur en place avant d’insérer le fil et se servir d’une pince ou d’un ciseau pour couper la gaine de caoutchouc après avoir vissé la vis lorsque celle-ci n’a pas perforé (se fier sur la marque laissée).
Petit truc: se servir d’une pédale pour tenir le connecteur en place avant d’insérer le fil et se servir d’une pince ou d’un ciseau pour couper la gaine de caoutchouc après avoir vissé la vis lorsque celle-ci n’a pas perforé (se fier sur la marque laissée).
Posted by Mathieu on Aug 7, 2022
Decent buy - love em 2 of 2 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Charlottetown, Prince Edward Island
I don't know why ppl are having problems splicing a cable with a simple system like this? I had one issue when I connected 8 boxes together and as it is with these things, it was MY FAULT since I didn't make the connection. Simple fix...Take your time and do it right. Been on 4 tours with these hooked up and zero issues.
**I did have a broken screwdriver in my first package (which I actually complained about and Boss sent me a bunch of stuff) I bought 2 kits eventually and had another screwdriver that worked - so all good :)
Posted by Roland on Jan 29, 2020
Great product, but more instructions and clarity needed 1 of 1 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Calgary Chinook, Alberta
I grabbed a few of these to build my 8-10 pedal board from the ground up and spent a lot of time researching the many different brands.
Originally I was drawn to Boss because it won best in show at NAMM when it was announced.
I tried the planet waves kit last year with no luck
At all, my friends use George L’s and
Love em but the price is high.
So I settled on boss and thought I’d give it a try.
I’d say I have to give them a 8/10 with one major factor being a noticeable negative that all these brands seem to avoid talking about.
Trimming and setting the cable into the plug isn’t too bad, putting the little screw in that acts as the ground when properly installed is key. It doesn’t simply secure the cable but must make contact with the inner wiring. Boss just glosses over the very specific and detailed way to put these together reliably.
#1 making a slit with a knife where the screw will go so it’s makes better contact is helpful.
#2 testing the sleeve and tip with a multimeter is paramount.
It’s not rocket science, but if your just following the back of the package, you’ll spend four frustrating hours getting no where like I did.
All in all, the Best Buy for you buck when it comes to cable kits.
Posted by Matthew orge on Oct 14, 2019
Works just fine. 1 of 1 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Edmonton Highlands, Alberta
This is a DIY kit. At the end of the day, it will work as well as any DIY kit will. The quality of the cables and the connectors are just fine. Being a soldier less joint, you really need to make sure the joint is pushed in tight, but otherwise they work fine. Be sure to check cables with a multimeter during install. When installed correctly, I found that these cables had lower resistance readings than the other ?pro? cables on my board. I only had 1 cable out of 12 that exhibited a volume drop, and it was because I installed it with a partial short between the hot wire and the shroud. The solution? Snip off 1/8 inch of the faulty cable and reinstall the jack. Easy as that. With some care and patience, a simple multimeter and basic skill, this product works great.
Posted by Nick on Sep 16, 2018
Do not buy this product. Garbage. 0 of 3 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I've tried it
Closest Store Toronto (Bloor St.), Ontario
I've spent probably and hour and a half to build 4 cables that I test, doesn't work, unscrew the screws, reseat the cable in the socket end, do the same to the other end, test again, not working... and repeat. Very frustrating. I had some cables I made had a very week signal ... half the volume of a soldered cable. I'd be weary about using this on a pro board.
Posted by Michael on Aug 5, 2018
Not recommended 0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Winnipeg (Wall St), Manitoba
I have this solderless cable and the quality is not there. it's too soft, the connection is too sensitive and I would not count on it. I usually use George L's which is superb at any class. it's expensive, can do it's job but in this case I prefer to solder...
Posted by Adir on Jul 23, 2018
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Solderless Pedalboard Cable Kit w/6 Connectors, 6 ft Cable | 687355 |
