Opens in a new window
ART Pro Audio
Mic/Line-Level Headphone Amplifier and Mixer
This product is no longer available.
Problem: A performer needs to hear him/herself through headphones exclusively or mixed with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic and line Monitor levels can then be adjusted for mix and volume through the headphones. Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered, the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or condenser mics can be used since phantom power would come through the Mic Thru jack from the mixer or other source.
SPECIFICATIONS:
• Signal To Noise Ratio: 90dB
• Gain: 15dB (1/4 in), 50dB (XLR)
• Maximum Input Level: -20dB mic, 40dB Monitor
• Output Impedance: 10 ohms
• Power Requirements: 12V DC (Adapter included) or one 9V battery
• Power: LED indicator
• Dimensions: 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
• Weight: 1.3lb (590g)
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic and line Monitor levels can then be adjusted for mix and volume through the headphones. Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered, the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or condenser mics can be used since phantom power would come through the Mic Thru jack from the mixer or other source.
SPECIFICATIONS:
• Signal To Noise Ratio: 90dB
• Gain: 15dB (1/4 in), 50dB (XLR)
• Maximum Input Level: -20dB mic, 40dB Monitor
• Output Impedance: 10 ohms
• Power Requirements: 12V DC (Adapter included) or one 9V battery
• Power: LED indicator
• Dimensions: 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
• Weight: 1.3lb (590g)
Q & A
There are currently no questions for this product.
Reviews
3.15.229.113
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
Is what it is... 2 of 2 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Vancouver, British Columbia
I needed a device to get a monitor mix to a drummer for in-ears. Most of the headphone amps are too large, don't have line level in, require USB or a combination of these.
This one simply lets me bring one line level mix in.(can be mixed with the Mic level input also.)
Pros: cheap, works (with mods: see Cons)
Cons: No mono switch so I had to build a tip-ring shorting cable for the input, no big deal. No 3.5 mm HP jack so I added one. Board mounted connectors are easy to break off the solder joints so mine is full of jumpers.
Keep this away from places where it could get stomped or worse.
Posted by John R on Oct 20, 2016
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Mic/Line-Level Headphone Amplifier and Mixer | 247831 |
