Manley DMMPX - Mono Mic Preamp With DI - Long & McQuade Musical Instruments
  Main Menu

Manley DMMPX - Mono Mic Preamp with DI

Add to Wish List
SKU: # 307114
Model: #


Your Price: $4,499.00 CDN



Manley's Dual Mono Mic Pre gives you two channels of huge Manley tone, and offers 40 to 60dBs of gain, so you have plenty of lift for most ribbon microphones. The Dual Mono Mic Pre's gain is selectable in precise 5dB steps - plus, you can use it alongside the input attenuator to summon a range of tones, from mellow to aggressive. What's more, there are 1/4" direct input jacks onboard, for enhancing your bass, drum machines, keyboards, and more with the renowned Manley Dual Mono Mic Pre's rich, tube tone.

Two channels with 48V phantom power and phase control
The Manley Dual Mono Mic Pre offers up two channels with plenty of gain (40-60dB) to support virtually any microphone you put in front of it. Phantom power is individually selectable on each channel and there's a convenient phase switch on each channel, as well.

Gain switch for variable feedback
The Dual Mono Mic Pre's clever gain switch lets you control how much feedback is introduced around the tube circuit, so you can achieve a wide variety of tones and amplification levels. Change tonal tube flavors quickly and easily as you dial in everything from the laid back and mellow to the up-front and aggressive - it's a great way to get creative and track down that "perfect" sound for each vocalist or instrument.

1/4" Direct Input jacks
Introduce any instrument to that rounder, "tube-y" tone using the Dual Mono Mic Pre's front-panel Direct Input jacks. When used in this way, the total gain becomes 20dB less than indicated on the front panel.

Balanced and unbalanced outputs
With the Manley Dual Mono Mic Pre, both transformer-coupled balanced outputs and direct capacitor-coupled unbalanced outputs are available, so you can choose between audiophile-pure or big iron sounds.

Manley Dual Mono Mic Pre Features:
Manley input & output transformers with nickel laminations in mu-metal cases
Flat frequency response from 10Hz-60KHz
Mic input PHASE REVERSE switch
2400 ohm mic input Z; 48V phantom power built-in
Hi-Z (100Kohm) 1/4" DIRECT INPUT
Noiseless conductive plastic INPUT attenuators
<0.05% THD @ 1Khz S/N ratio: 80dB
EIN: -125dB
Adjustable FEEDBACK / GAIN switch selects 5dB steps between 40 to 60 dB of gain
Hi-current drive <50 ohm LO-Z 1/4" & XLR outputs
AUTO MUTE w/ warm-up delay for power up/down
Max. input (with input pad fully open): 450mV
Max. output: +32dBu
Max. output (into 600 ohm load): (+15dBm)
Power consumption Mono units: 18 watts; Dual Mono units: 36 watts
Mains Voltage Frequency: 50~ 60Hz
Dimensions: 19" x 1 3/4" x 10" (occupies 1 RU)
Shipping Weight: 12 lbs.
There are currently no reviews for this product, be the first to write one!