Yamaha
Stagepas 200 Portable PA System with Lithium-Ion Battery
Additional Photos:
Product Videos :
STAGEPAS 200 provides all the features of a high-quality portable PA system in a remarkably compact 12" cube-shaped enclosure. Alongside its portability and sound quality, it offers ample functionality and mixing capacity, intuitive operation and support for Bluetooth audio streaming and remote control. Available with an optional battery pack, STAGEPAS 200 is suitable for a wide range of applications, from street performances to events, parties and speeches.
The system is very easy to operate. As well as onboard controls, the Yamaha iOS/Android STAGEPAS Controller app provides realtime, precise remote control of volume, EQ and effects including reverb, compression, microphone simulator, ducker and feedback suppressor. Settings can be saved and recalled, greatly reducing setup time, ensuring consistent sound and allowing users to concentrate solely on their performance.
The system's flexibility is enhanced by a rubber stand which can tilt the unit at a 30° or 60° angle, for use either as an audience fill speaker or as a floor monitor for performers. The base of the cabinet also houses a 35 mm pole mount socket, allowing it to be mounted on a speaker stand or with a subwoofer using a distance rod.
Features
• 180 W (HF: 30 W + LF: 150 W) Class-D amplifier
• 1.4" HF + 8" LF high-quality coaxial compression driver
• 5-channel digital mixer (3 monaural mic/line + 1 stereo line)
• Main output multi-band compressor "MODE"
• 1-knob EQ/preset for each channel
• High-grade SPX digital reverb (4 program, parameter control), delay, chorus
• Hi-Z input
• Equipped with link-out/monitor out
• Supplied rubber stand allows inclining at 30 or 60 degrees
• Compatible with audio streaming via Bluetooth
• Can be controlled remotely via an iOS or Android device using the dedicated STAGEPAS Controller app
• Includes one BTR-STP200 Lithium-ion battery
• Optional CASE-STP200 carry case for convenient carrying
Specifications
Type: 2-way Bi-amp Powered Speaker with mixer
MIXING CAPABILITY
Mixing channels: 5 (Mono x3 + Stereo x1)
Input channel functions: Hi-Z: CH2/3, 1-knob EQ/Preset: CH1-3/ST
Output channel functions: MODE (SPEECH/MUSIC/CLUB)
I/O
Inputs: Mono x3 (mic/line) + Stereo/Mono x1 (line)
Outputs: Monitor/Link out x1
Bluetooth: Ver.5.0, A2DP (SBC, AAC), Class 1
Control and others: STAGEPAS Controller (iOS/Android app)
ON-BOARD PROCESSORS
DSP: SPX digital reverb (4 program, parameter control), delay, chorus
GENERAL SPECIFICATIONS
Speaker type: Coaxial speaker with compression driver
Frequency range (-10dB): 60 Hz 20 kHz
Coverage area: H90° x V90°
Crossover: 2.0 kHz
Maximum output level (1m; on axis): 125 dB SPL
COMPONENETS
LF: 8" Cone, 2.0" voice coil
HF: 1" throat compression driver, 1.4" voice coil
Amplifier class: Class-D
POWER RATING
Dynamic: 180 W (LF: 150 W, HF: 30 W)
Cooling: Natural convection (no fan)
Power consumption: 10 W (Idle), 20 W (1/8 power)
Power requirements: 100-240 V 50/60 Hz, or 29.6 Vdc
Battery
Type: Rechargeable Lithium ion battery pack
Capacity: 79.92 Wh (2700 mAh, 29.6 V)
Operating Time: Maximum 10 hours, 1/16 power continuous 8 hours
Charging Time: Approx. 4 hours
Cabinet material: Plastic (ABS)
Handle: Top x1
Pole socket: dia. 35 mm x1 (Side)
Floor Monitor Angle: 30° or 60°
Dimensions (W x H x D): 300 x 308 x 301 mm (11.8" x 12.1" x 11.9")
Weight (including battery): 12.5 kg (27.6 lbs)
Included Accessories: Power cord x 1, Battery x 1
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Stagepas 200 Portable PA System with Lithium-Ion Battery | 783090 |
