Departments > Pro Audio & Recording > Studio Monitors > Reference Monitors - Active > Dynaudio > BM6 MKIII 7-Inch Powered Studio Monitor

Dynaudio

BM6 MKIII 7-Inch Powered Studio Monitor

SKU: # 418214   |   Model: # BM6MKIII   |    Product Reviews0 Reviews  Write a Review

BM6 MKIII 7-Inch Powered Studio Monitor

Additional Photos:

BM6 MKIII 7-Inch Powered Studio Monitor
 This product is no longer available.
The BM6 mkIII builds on the success of the BM6A MKII design, re-voiced around Dynaudio's next generation waveguide. Designed and often chosen as a bridge to mid-field, its small size belies its ability to deliver high SPL and broad frequency response, while the hand-crafted drivers deliver superior performance.

• Extended excursion 7" woofer with pure aluminum voice coil.
• 1.1" soft dome tweeter with pure aluminum voice coil.
• 100W LF and 50W HF Class AB amplifier.
• Bundled with IsoAcoustics ISO-L8R200 speaker stand for decoupling and proper angling.
• Optional TC Electronic Level Pilot or BMC-2 for precision level control
• Made in Denmark

FEATURES

• 119dB SPL peak power output
• Frequency response of 40Hz-21kHz
• Extended bass with BM14S II precision subwoofer
• HF, MF, LF analog room filters allow flexible positioning
• High pass filters at 60/80Hz for perfect subwoofer adaption
• Input sensitivity switch (-10/+4dB range)

ISO Acoustics Monitor Stands

When we started looking for the best solution for isolating the BM mkIII monitors from the surface, we found that ISO Acoustics provide the best and most flexible product on the market.

Therefore, we formed a partnership with ISO Acoustics that allowed us to bundle every BM mkIII monitor with a dual-branded stand that also allows you to angle your monitors slightly upwards or downwards in order to match your listening position perfectly.

The ISO-L8R155 is bundled with Compact mkIII and 5 mkIII, while the ISO-L8R200 is included with BM6 mkIII and 12 mkIII.

SPECIFICATIONS

• Model: BM6 mkIII
• System: Two-way Active Precision Nearfield Monitor
• Frequency Response: 40 Hz - 21 kHz
• Input level for 85 dB SPL @ 1m: 119 dB peak
• Power consumption: Standby: 0.3 W Idle: 5.8 Max: 94 W
• Amplifier power: Tweeter: 50 W / Woofer: 100 W
• Resonance Frequency: 37 Hz
• Bass Principle: Bass reflex
• Crossover Frequencies: 1500 Hz
• Crossover Slope: 6 dB/oct
• Tweeter: Esotec 28 mm/1.1 soft dome, Rear chamber, Magnetic fluid 4 mm alu front, Pure alu wire voice coil
• Woofer: 175 mm/7, One-piece molded poly-prop cone, 75 mm/3 pure alu voice coil
• Weight: 11,05 kg / 24.36 lbs
• Dimensions (WxHxL): 202 x 334 x 328 mm / 7.9 x 13.1 x 12.9

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.