Departments > Pro Audio & Recording > Wireless Systems > Shure > P9T Transmitter for PSM900 IEM System (G6: 470 to 506 MHz)

Shure

P9T Transmitter for PSM900 IEM System (G6: 470 to 506 MHz)

SKU: # 427730   |   Model: # P9T-G6   |    Product Reviews0 Reviews  Write a Review

P9T Transmitter for PSM900 IEM System (G6: 470 to 506 MHz)

Additional Photos:

P9T Transmitter for PSM900 IEM System (G6: 470 to 506 MHz)
P9T Transmitter for PSM900 IEM System (G6: 470 to 506 MHz)

Product Videos :

YouTube Video PSM900 System Overview
Your Price: $989.00 CDN
or from $105 CDN/mo

Buy Online

 Add to Cart

Buy In-Store

The P9T is a half-rack wireless transmitter used in conjunction with the P9RA+ Bodypack receiver as part of the PSM900 Wireless Personal Monitor System. It offers state-of-art technology including CueMode (patent pending), RF Sync, and RF mute switch for easy setup and operation. Connections include balanced 1/4" and XLR, loop out, and headphone out. Includes rack-mounting kit, front or back mountable antennas, and power supply.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.

Features:
• RF Mute Switch allows system setup without causing RF interference
• Syncs to a P9R bodypack quickly and easily over IR link using Scan and Sync
• Front panel audio input gain adjustment and LED level meter with clipping indicator
• Front or rear mountable antennas
• Compatible with PA421A and PA821A antenna combiners
• Loop out connectors for multiple mix setups and easy installation
• Switchable +4 dBu and -10 dBV input level
• Balanced, 1/4" and XLR connectors
• Bit-mapped, backlit LCD
• Includes rack-mounting hardware
• 1/8" headphone out on the front panel for easy monitoring

Specifications:
RF Output Power: Selectable 10, 50, 100 mW (regionally dependent)
RF Output Impedance: 50 Ω (typical)
Net Weight: 850 g
Dimensions: 197 mm x 166 mm x 42 mm (7.75in x 6.55in x 1.65in)
Power Requirement: 415 mA typical @ 120VAC (with RF on 100 mW power mode, no audio)

AUDIO INPUT
Connector Type: Combination XLR and 6.35 mm (1/4") TRS
Polarity: XLR: Non-inverting (pin 2 positive with respect to pin 3);
6.35 mm (1/4") TRS: Tip positive with respect to ring
Configuration: Electronically balanced
Impedance: 70.2 kΩ (actual)
Nominal Input Level: Switchable +4 dBu, 10 dBV
Maximum Input Level +4 dBu: +23.3 dBu; 10 dBV: +12.5 dBu
Pin Assignments: XLR: 1=ground, 2=hot, 3=cold;
6.35 mm (1/4") TRS: Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection up to 60 V DC

AUDIO OUTPUT
Connector Type: 6.35 mm (1/4") TRS
Configuration: Electronically balanced
Impedance: Connected directly to inputs

Media


PSM900 System OverviewWatch Video
Youtube video product demo

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.