Departments > Pro Audio & Recording > DJ > DJ - Mixers - Tabletop > RANE > TTM57mkII Mixer with Intuitive Serato DJ Controls

RANE

TTM57mkII Mixer with Intuitive Serato DJ Controls

SKU: # 437215   |   Model: # TTM57 MKII   |    Product Reviews0 Reviews  Write a Review

TTM57mkII Mixer with Intuitive Serato DJ Controls

Additional Photos:

TTM57mkII Mixer with Intuitive Serato DJ Controls
TTM57mkII Mixer with Intuitive Serato DJ Controls
TTM57mkII Mixer with Intuitive Serato DJ Controls
 This product is no longer available.
The TTM57mkII stays true to its original design by supporting familiar workflow while improving performance and software integration. Updated software controls include silicone RGB backlit pads for triggering 4 cue points per deck or the SP-6 sampler. Classic joystick controls toggle slip, instant doubles, internal mode, censor, and transform. Dedicated auto-loop & loop roll controls with back-lit buttons. Intuitive Serato DJ iZotope FX controls for easy & quick access.

The mixer features Rane's exclusive dual USB port architecture for intuitive DJ change over and supports creative dual computer applications. The TTM57mkII is a classic reborn.

Key improvements include:

• Dual USB 2.0 high speed class compliant audio and MIDI USB ports:
• No driver required on a Mac
• High performance ASIO driver for Windows
• 10 record and 10 playback channels per port
• Sample rates of 44.1 kHz, 48 kHz and 96 kHz.
• Dedicated Serato DJ iZotope USB FX inserts for each deck.
• Software color coded silicone RGB back-lit pads.
• Aux USB input dedicated to the SP-6 sampler.
• 3 High/Low-Pass sweep filters for Decks 1, 2 and Aux.
• Rane's proprietary non-contact magnetic faders.

Specifications:

Analog Inputs:
4 Stereo unbalanced RCA jacks
- Phono or Line level input, rear panel switches for each input; Max Line Input: 4 Vrms
- Phono Response: RIAA 1 dB, Gain: 31 dB at 1 kHz; Rumble filter: Butterworth 3rd-order Infrasonic; Max Phono Input:126 mV

ADCs: 24-bit, 48 kHz; Dynamic range 102 dB A-weighted

DACs: 24-bit, 48 kHz; Dynamic range 108 dB A-weighted

Digital Signal Processing: 32-bit floating point

USB Audio: Five Stereo Record, Five Stereo Playback
- 44.1, 48, or 96 kHz, 24-bit PCM
- Class-compliant, no driver needed for Mac OSX (10.7 to 10.10)
- ASIO driver provided for Windows 7-SP1, Windows 8 and 8.1

FlexFX: Stereo unbalanced 1/4" TS (tip-sleeve) phone jack send and return

Mic Input:
- Balanced 1/4" TRS & XLR combination jack
- Single-knob High / Low Tone control
- Mic / Line level switch to connect a wireless receiver

Frequency Response: 20 Hz to 20 kHz 0.25 dB, Line in to Line out

Dynamic Range: 101 dB A-weighted

THD+N: < 0.01% re 0 dBFS, 20 to 20 kHz, 20 kHz BW

Line Outputs:
- Unbalanced jacks (RCA & FlexFX): Maximum 4 Vrms
- Balanced jacks (Main 1/4"): Maximum 8 Vrms

Internal Universal Power Supply: 100 to 240 VAC, 50 Hz to 60 Hz, 15 W max

Unit Size: 14" x 10" x 4" (35.6 x 25.4 x 10.2 cm)
Weight: 8 lb (3.7 kg)

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.