RODE

Digital Wireless System for Filmmakers

RODELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres• (over 100 yards). The RODELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RODE's omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.

*range estimations based on optimal environment

Overview:

• Series II, 2.4GHz digital transmission
• 128-bit encryption
• Up to 100 metres range*
• OLED display (on receiver)
• One button pairing
• Three level gain control
• AA battery or USB powered
• Includes broadcast pin microphone

Specifications:

RODELink Filmmaker Kit
Transmission type: 2.4GHz Fixed Frequency Agile System
System dynamic range: 112dB
Range (distance): Up To 100m
Frequency range: 35Hz - 22kHz
Maximum output level: 1v Rms (2.8v P-p)
Max input signal level: 1v Rms (2.8v P-p)
Max latency: 4ms

Receiver (RX-CAM)
Power source: 2 X AA Battery Or MicroUSB
Antenna: Internal
Input connection: 3.5mm TRS Locking Jack Socket - Dual Mono
Input impedance: 300Ω
Dimensions: 111mm X 65mm X 52mm
Weight: 190gm

Transmitter (TX-BELT)
Power source: 2 X AA Battery Or MicroUSB
Antenna: Internal
Input connection: 3.5mm TRS Locking Jack Socket
Input impedance: 10kΩ
Dimensions: 111mm X 65mm X 40mm
Weight: 190gm

Pinmic Specifications:

Transducer: Condenser
Polar Pattern: Omnidirectional
Frequency Response: 60Hz - 18kHz
Signal-to-Noise Ratio: 69dB
Equivalent noise: 25dBA SPL (per IEC651)
Maximum Input Sound Level: Maximum SPL 110dB (clipping SPL)
Power Requirements: Min 2V - Max 5V through MiCon wireless adaptors; P48 through MiCon XLR adaptor
Output Impedance: 3kΩ Typical
Output Connectors: MiCon XLR Adaptor
Dimensions (HxWxD): 0.62 x 0.86 x 1.29" (16 x 22 x 33mm)
Weight: 0.35oz (10g)