Bettermaker

EQ 232P MKII Remote

SKU: # 477505   |   Model: # EQ 232P MKII RE   |    Product Reviews0 Reviews  Write a Review

EQ 232P MKII Remote
 This product is no longer available.
The Bettermaker EQ 232P MKII is an analog EQ with 10 filters (5 on each channel) based on classic designs including 2 famous P sections, 2 Highpass filters and 4 parametric filters with wide frequency ranges. The Pultec section has shelf filters based upon legendary constructions, offered in combined, matched stereo, with all the features including separate boost and attenuation knobs. Besides their pure analog signal paths, these units have a full digital recall with 399 cells for your own presets, which you can recall with one touch.

The remote version of the Bettermaker EQ232P MKII has identical circuitry, but all operations are done via a dedicated plugin in your D.A.W.

Features:

• 10 filters (5 on each channel) based on classic designs including 2 famous Pultec sections, 2 Highpass filters and 4 parametric filters with wide frequency ranges.
• Pultec section with shelf filters based upon legendary constructions, offered in combined, matched stereo, with all the features including separate boost and attenuation knobs.
• 24dB/Oct Highpass filter, the only one on the market
• 4 Parametric filters (2 on each channel) covering form 15Hz to 15kHz.
• Full digital recall with 399 cells for your own presets.
• USB link to use the EQs just as you would use a plugin, including Automation.
• AU, VST, RTAS, AAX (32 & 64 bit, WIN, OSX) supported
A/B comparing function
• Fully isolated analog and digital path for maximum separation of these two worlds
• 7 presets to have a kick start
• 24 dB headroom
• Stereo, Dual Mono, M/S modes

Specifications:

Model: EQ 232P MKII
Frequency response: 5Hz to 100kHz (-0.5dB)
Dynamic range: more than 106 dB
S/N ratio: more than 104 dB
THD+N: less than 0.004%
Channels: 2
Weight: 7kg
Supply voltage: 110V AC 50/60Hz or 230V AC 50Hz (depending on model)
Power consumption: 15 W
Input impedance: 10k Ohm unbalanced, 20k Ohm balanced
Output impedance: 100 Ohm unbalanced, 200 Ohm balanced
Max input level: +24dBu balanced or +18dBu unbalanced
Max output level: +24dBu balanced or +18dBu unbalanced
Unity gain: balanced: 0dB, unbalanced: -6dB
Clip detector: present
High-pass filter: 24db/oct 18 - 200Hz (variable)
EQ 1 freq. range: 45 - 1000Hz
EQ 1 gain: -15 to +15dB
EQ 1 bandwidth: 0.2oct to 3oct
EQ 2 freq. range: 650 - 15000Hz
EQ 2 gain: -15 to +15dB
EQ 2 bandwidth: 0.2oct to 3oct
P EQ low freq. range: 20, 30, 60, 100Hz
P EQ high freq. range: 3, 4, 5, 6, 10, 12, 16 kHz
P EQ high cut freq: 5, 10, 20 kHz 6db/oct
Preset storage capacity: 399 presets

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions