Shure
VP89M Professional Shotgun Condenser Microphone w/Case - Medium
Additional Photos:
Product Videos :
The VP89M (MEDIUM) shotgun has a 50° acceptance angle and maximum rejection from the sides.
A two-position switch on the preamplifier adjusts the low-frequency response. Use the low-frequency filter to reduce room noise or proximity effect. Normal response provides the most natural sound in most applications. Low-frequency rolloff provides a 12 dB-per-octave rolloff below the specified frequency. Reduces floor rumble and low-frequency room noise from heating and air conditioning systems.
Condenser Microphone, Switchable Polar Pattern (Hypercardioid / Lobar), Bottom cable exit, black, 3-pin XLR connector
Features
• Highly directional, uniform polar pattern optimized for distant pickup (sporting events, ENG wildlife field recording)
• Modular design allows optimal performance in a wide variety of production settings
• Designed for extremely low susceptibility to radiated and conducted hum, GSM, and radio frequency interference (RFI)
Superior common mode rejection
• Low self-noise and high output level
• Class A, discrete preamplifier provides transparent, extremely fast transient response with no crossover distortion and minimal harmonic and intermodulation distortion
• Selectable low-frequency response
• Lightweight, compact design accommodates prolonged operation, minimizing operator fatigue attributed to many shotgun microphones
• Aircraft-grade aluminum alloy construction resists wear and abuse
• Operates over a wide range of temperatures and humidity
• Switchable Polar Pattern (Hypercardioid / Lobar)
• Requires phantom power and performs best with a 48 V DC supply
Specifications
Cartridge Type: Electret Condenser
Polar Pattern: Hypercardioid/Lobar
Frequency Response: 40 to 20,000 Hz
Output Impedance: 115.0
Sensitivity: open circuit voltage, @ 1 kHz, typical
Maximum SPL 1 kHz at 1% THD[2]:
2500 load | 132.0 dB SPL
1000 load | 128.5 dB SPL
Signal-to-Noise Ratio[3]: 79.0 dB
Dynamic Range @ 1 kHz:
2500 load | 117.0 dB
1000 load | 113.5 dB
Clipping Level @ 1 kHz, 1% THD:
2500 load | 4.0 dBV
1000 load | 0.0 dBV
Self Noise: equivalent SPL, A-weighted, typical 15.0 dB
Common Mode Rejection: 20 to 20,000 Hz >=70.0 dB
Low-Frequency Filter Switch: -12 dB/oct below specified frequency
Flat Response: 100 Hz
Low Frequency Rolloff: 200 Hz
Operating Temperature Range: 18C (0F) to 57C (135F)
Storage Temperature Range: -29C (-20F) to 74C (165F)
Operating Relative Humidity: 0 to 95%
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Housing: Charcoal-grey metallic painted aluminum alloy handle and grille with stainless steel screen
Power Requirements: 11-52 V DC[4] phantom power (IEC-61938), < 2.0 mA
Net Weight: 174 g (6.1 oz.)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| VP89M Professional Shotgun Condenser Microphone w/Case - Medium | 483175 |
