Genelec
8330A 5'' 2-Way Digital Nearfield Monitor (Single) - Black
Additional Photos:
The choice of professionals for whom power and flexibility go hand-in-hand, the 8330A is as acoustically impressive as it is Smart, courtesy of Smart Active Monitoring (SAM) technology. Housing a 5 inch woofer and 3/4 inch tweeter, the Class D bi-amplified, two-way Smart monitor is compact enough to fit into studios where space is at a premium, yet still capable of exceeding even the most demanding client expectations.
Features:
• 5 inch woofer and 3/4 inch tweeter
• Minimum Diffraction Enclosure (MDE), die-cast from recycled aluminum
• Directivity Control Waveguide (DCW)
• Genelec quality and reliability
• Balanced analogue input (XLR)
• AES/EBU digital input and output (XLRs)
• Networked via GLM 2.0 and CAT5 connections
• Genelec 2 x 50W Class D amplification
• Universal mains voltage
• Efficient, distortion-free reflex port
• Each monitor is supplied with a mains cable, 5 meter RJ45 cable, and an operating manual.
System Specifications:
Frequency range 6 dB: 45 Hz 23 kHz
Accuracy of frequency response: 1.5 dB (58 Hz - 20 kHz)
Maximum short term sine wave acoustic output on axis in
half space, averaged from 100 Hz to 3 kHz: > 104 dB SPL
Maximum long term RMS acoustic output in same conditions
with IEC weighted noise (limited by driver unit protection
circuit): > 96 dB SPL
Maximum peak acoustic output per pair, at 1 m distance with
music material: > 110 dB
Self generated noise level in free field on axis: < 5 dB (A-weighted)
Harmonic distortion at 85 dB SPL on axis: 50...100 Hz < 2 %,
>100 Hz < 0.5 %
Drivers (Both drivers are magnetically shielded):
Woofer: 130 mm (5 in) cone
Tweeter: 19 mm (3/4 in) metal dome
Weight: 5.5 kg (12.1 lb)
Dimensions:
Height including Iso-Pod table stand: 299 mm (11-13/16 in)
Height without Iso-Pod table stand: 285 mm (11-1/4 in)
Width: 189 mm (7-7/16 in)
Depth: 178 mm (7 in)
Amplifier Section
Bass amplifier short term output power: 50 W
Treble amplifier short term output power: 50 W
Total harmonic distortion at nominal output: < 0.05%
Mains voltage: 100-240 VAC, 50-60 Hz
Power consumption (ISS active / idle / maximum): < 0.5 W / 3.0 W / 50 W
Input Section
Digital AES/EBU audio signal connectors (Single wire): XLR female IN, XLR male OUT
Input word length: 16 - 24 bits
Input sampling rate: 32 - 192 kHz
Crossover frequency: 2.9 kHz
Analog input (load impedance): XLR female (10 kOhm, balanced)
Analog input level for 100 dB SPL output at 1 meter: -6 dBu (adjustable in GLM software)
Maximum analog input: 24 dBu
GLM Control network connectors: 2 x RJ45
*Sold individually.
Q & A
Reviews
By itself not enough of an improvement over the 8030a to change, but the game changes with the GLM controller.
The Glm 4.2 calibration software makes the transition to my subwoofer almost completely inaudible. The automatic setting seems so good that i never felt the need to tweak the settings. The new Grade report quickly identified a problem with my iso booth window reflection, that i previously felt was no big deal. i put a sound panel over over the window and sure enough, solid imaging improvement. Great easy to use tool.
Though not the least expensive monitor of its size out there, i can't think of any monitor at or near its price point that i think is a better value. Great speaker.
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| 8330A 5'' 2-Way Digital Nearfield Monitor (Single) - Black | 499354 |
