Departments > Pro Audio & Recording > Pro Audio & Recording Accessories > Power Conditioners/Bars > Surgex > Rack Mount Surge Eliminator and Power Conditioner, 20A/120V, 1U

Surgex

Rack Mount Surge Eliminator and Power Conditioner, 20A/120V, 1U

SKU: # 502160   |   Model: # SX1120 RT   |    Product Reviews0 Reviews  Write a Review

Rack Mount Surge Eliminator and Power Conditioner, 20A/120V, 1U

Additional Photos:

Rack Mount Surge Eliminator and Power Conditioner, 20A/120V, 1U
Your Price: $1,662.00 CDN
or from $138 CDN/mo

Buy Online

 Add to Cart

Buy In-Store

Featuring Advanced Series Mode surge elimination technology, the SurgeX Rack Mount product line safeguards sensitive equipment that relies on audio and video performance. Unlike common protection solutions, this patented technology is non-sacrificial and eliminates surge energy up to 6,000 volts without producing harmful side effects such as ground contamination or common-mode disturbances that can degrade the performance of AV systems.

With SurgeX rack mount solutions your connected equipment will be protected from destructive spikes, surges, and inductive transients that can cause disruptions and catastrophic damage.

Features:

• Advances Series Mode surge elimination technology
• Catastrophic over/under Voltage Shutdown Protection
• ICE Inrush Current Elimination
• EMI/RFI filter
• Thermal circuit breaker overload protection
• Improves audio and video performance
• Non-sacrificial components
• A-1-1 Certified

Specifications for SX-1120-RT:


Load Rating: 20 @ 120 volts

Power Requirement (no load): 15 watts

Surge Let-Through Voltage (6000-volt surge): 0 Volts

UL 1449 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, B3 pulse

Measured suppressed voltage: 170 volts, no failures

Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818)

EMI/RFI Filter, Normal Mode (50-ohm load):
40 dB @ 100 kHz; 50 dB @ 300 kHz;
50 dB @ 3 MHz; 50 dB @ 30 MHz

EMI/RFI Filter, Common Mode (50-ohm load):
18 dB @ 300 kHz; 30 dB @ 1 MHz;
50 dB @ 5 MHz; 50 dB @ 20 MH

Maximum Applied Surge Voltage: 6000 volts*

Maximum Applied Surge Current: Unlimited, due to current limiting*

Maximum Applied Surge Energy: Unlimited, due to current limiting*

Endurance (C62.41-1991 Category B3 pulses): 1 kV > 500,000; 3 kV > 10,000; 6 kV > 1000

Undervoltage Shutdown: 90 volts (resume at 100 v)

Overvoltage Shutdown: 145 volts (resume at 135 v)

Maximum Load Inrush Current during Power-up: 1000 Joules

Remote Turn-on Applied Voltage Range: 5 to 30 volts DC

Contact Closure: 1.5 mA

5 V DC Applied Voltage: 0.1 mA;
12 V DC Applied Voltage: 1.5 mA
24 V DC Applied Voltage: 5.0 mA

Auxiliary Relay Contact Rating: 30 Volts at 1 Amp

LED Output: 12 volts DC, maximum 20 mA (resistor required)

Dimensions: 1.75″ H x 19″ W x 10.5″ D (4.5 x 48.3 x 26.7 cm)

Weight: 11 lbs (5 kg)

Temperature Range: 5 to 35 degrees C

Humidity Range: 5% to 95% R.H., non-condensing

Agency Listings: ETL and cETL certified to (UL 1449; CSA C22.2 No.8-M1986, R2000)

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions