Sorry, this item is not available for purchase

Gear Hunter

ART Pro Audio - PROCHANNELII Mic Pre/Channel Strip

SKU: 357114 Model: PROCHANNELII
Quantity Available: 0 Condition: Demo

ART Pro Audio - PROCHANNELII Mic Pre/Channel Strip

Buy From Store

 Pick up at the store only. Contact Ottawa Ontario


Description

***OPEN BOX.***

The ART Pro Channel II uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.

The ART Pro Channel II 's semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.

Features:
Fully Featured discrete class "A" Tube Microphone Preamplifier
1/4" High Z input on the front panel
Selectable plate Voltage
Smooth musical sounding Optical Compressor
Separate Attack and Release controls
Auto/Manual Attack/Release switch
Parametric EQ
Large VU and LED meters
Multi section clip monitor LED
Selectable Source switches for VU signal monitoring of any section of the unit
Two insert loops
+4/-10 dB switch for optimal signal output levels
Toroidal power transformer for low noise

Specifications:
Input Impedance
- Mic: 150 to 3.4K Ohms, variable
- Instrument: 2.5M Ohms
- Preamp Insert: .5K Ohms

Output Impedance
- Balanced Output: 600 Ohms balanced
- Unbalanced Output: 300 Ohms
- Insert Outputs: 300 Ohms

Frequency Response
- Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
- THD @ 1 KHz: <0.15% typical
- THD @ to to 20 KHz: <0.033% typical

Equivalent Input Noise
- Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
- Instrument: -109 dBu, Input shortened, Max gain, "A" weighted

Maximum Input Level
- Mic: +18dBu balanced
- Instrument: +15 dBu

Maximum Gain
- Mic: 70dB (XLR to balanced output)
- Instrument: 64 dB (1/4" to balanced output

Maximum Output Level
- Balanced: +24 dBu
- Unbalanced: +20 dBu
- Output Level At Meter 0 VU: +4 dBu/-10dBV

Preamp
- Microphone Gain: 0 dB to +56 dB
- Instrument Gain: +3 dB to +50 dB
- Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave

EQ
- Boost/Cut: +/- 12 dB on each band
- Low Freq. Tuning: 40 / 120 Hz Selectable
- MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
- MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
- High Freq. Tuning: 6 KHz / 18 KHz Selectable

Compressor / Limiter
- Attack Time: 250 uSec. to 100 mSec.
- Release Time: 00 mSec to 3 Sec.
- Compression Ratio: 2:1 to 30:1

- Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2
- Dimensions (cm): 8.9 x 48.3 x 23.3
- Weight (lbs/kg): 11/5
- Power Requirements: USA - 105 to 125 VAC/ 60 Hz
- Export units configured for country of destination