Turbosound

Co-axial 2500 Watt 2 Way 12" Stage Monitor with Klark Teknik DSP Technology and ULTRANET

The 2-way full range TFM122M-AN is a 2,500 Watt 12" powered loudspeaker system that is ideally suited for a wide range of portable speech and music sound reinforcement applications. Designed to work individually without a controller, the TFM122M-AN provides optimal performance for wedge monitoring and is an exceptional choice for FOH, sidefill and delay line applications.

The TFM122M-AN loudspeaker features a carbon fibre loaded 12" neodymium low frequency driver and a titanium dome 1.4" neodymium high frequency compression driver, which is mounted on a 60 horizontal by 40 vertical dispersion low distortion waveguide.

Equipped with a very efficient and lightweight KLARK TEKNIK Class-D power amplifier, the TFM122M-AN provides an impressive 2,500 Watts of output power in a highly portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and large heat sinks.

A high degree of control over the loudspeaker systems performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels and long-term reliability.

Features

• 2 way stage monitor for touring applications
• 2,500 Watt power featuring Klark Teknik Class-D technology
• Klark Teknik Digital Signal Processing for total system control
• ULTRANET digital audio networking connects to mixers and other sources
• Carbon fibre loaded 12" neodymium motor low frequency driver
• Titanium dome 1.4" neodymium motor compression driver
• Low profile design to maximise audience sight lines
• Low distortion waveguide provides 60 degree H x 40 degree V dispersion
• Fully featured user interface with LCD display for ease of navigation
• PC remote control software downloadable at turbosound.com
• 15 mm (5/8") plywood enclosure with fibre glass reinforced composite end cheeks
• Hard wearing semi matt black paint finish
• Rugged powder coated perforated steel mesh grille
• Durable handle for easy lifting and carrying
• Mains input and link output on Neutrik powerCON connectors

Technical Specifications

System
Frequency Response:
70 Hz - 18 kHz +/- dB
63 Hz - 20 kHz -10 dB

Nominal Dispersion: 60-degrees H x 40-degrees V @ -6 dB points, rotatable
Maximum SPL: 130 dB peak
Crossover type: Active
Transducers:
1 x 12" (315 mm) LF driver
1 x 1.4" (33 mm) HF compression driver
LimiterIndependent: HF, LF, peak and rms

Amplifier
Maximum output power: 2500 W
Type: Class-D
Protection: Short circuit, thermal

Connectors
Input / Link: 1 x combo jack/XLR, 1 x XLR
Sensitivity: -2 dBu
Input impedance: 40 kO balanced
Maximum input level: +12.5 dBu
Ultranet input/link: 2 x RJ45
Mains Supply: Neutrik powerCON input 20A and link 15A

Controls
DSP: Rotary push-encoder and level control; Buttons for Process, Setup, Exit, Enter

User DSP Functions
Factory EQ presets: Positioning, Sound mode, FBQ
Display: LCD 128 x 32, blue , backlit
Delay: 0 - 300 ms
Equalisation: High and low shelving EQ, 2 x parametric EQ
Limiter: Zero attack input limiter
Presets: 20 total presets, 19 user-definable
Crossover: High pass L-R 24 dB/oct
Protection: Lock-out function for all settings

Ultranet Digital Network
Digital processing
Factory EQ presets: 24-bit, 44.1 / 48 kHz sample rate

System
Signal: 16 channels
Latency: < 0.9 ms

Cables: Shielded CAT5
Cable length: max. 246 ft / 75 m recommended

Power Supply
Power consumption: 180 W @ 1/8 max power
Voltage (fuses): 120 V~, 60 Hz (T 15 A H 250 V)

Dimensions (H x W x D): 302 x 452 x 504 mm (11.9 x 17.8 x 19.9")
Net weight: 16.5 kg (36.3 lbs)