Lectrosonics LT Digital Hybrid Wireless Belt-Pack Transmitter - Long & McQuade Musical Instruments
  Main Menu

Lectrosonics LT Digital Hybrid Wireless Belt-Pack Transmitter

Departments > Pro Audio & Recording > Accessories > Mics - Wireless Accessories > Lectrosonics > LT Digital Hybrid Wireless Belt-Pack Transmitter
Add to Wish List
SKU: # 700549
Model: #


Your Price: $1,775.00 CDN



The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wireless receivers and even some from other manufacturers, making it comfortable in a wide variety of applications from video production to theater, stage and house of worship. The LT can be configured to operate as a one-touch device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel membrane switches and LCD interface. The top panel switch can also be configured to provide a mute or talkback function.

• Covers two frequency blocks
• Digital Hybrid Wireless for compandor-free audio
• Selectable 50 or 100mW output power
• Compatibility modes for use with analog receivers
• 25 or 100 kHz tuning steps
• Integrated multi-function switch for mute or talkback modes
• Wide range input gain control in 1 dB steps
• IR port for setup with IR enabled receivers
• USB port for firmware updates
• Menu selectable mic or instrument
• Detachable antenna

Frequency Selection Steps: Selectable; 100 kHz or 25 kHz
RF Power output: Selectable: 50 or 100mW
Compatibility Modes (3): Nu Hybrid, IFB, Mode 3
Pilot tone: 3.5 kHz deviation (Nu Hybrid)
Frequency Stability: 0.002%
Spurious radiation: Compliant with ETSI EN 300 422-1 v1.4.2
Equivalent input noise: 120 dBV (A-weighted)
Input Level: Mic - Nominal 2 mV to 300 mV, before limiting, greater than 1V maximum with limiting. Instrument - 1M Ohm high level
Input impedance: 2k Ohm
Input limiter: DSP controlled, dual envelope soft limiter with greater than 30 dB range
Gain control range: 44 dB; digital control
Modulation indicators: Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation, LCD bar graph
Frequency Response: 35 Hz to 20 kHz, +/-1 dB, low frequency roll off can be set for 3 dB down points at 35, 50, 70, 100, 120 or 150 Hz
Controls: Top panel slide switch; programmable as power, mute, talkback or no (off) function, Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls
Audio Input Jack: Switchcraft 5-pin locking (TA5F)
Antenna: Galvanized steel, flexible wire
Battery: Two AA; alkaline, lithium, NiMH rechargeable
Weight: 5.9 ounces (169 grams), with lithium AA batteries
Dimensions: 2.85 x 2.45 x .75 in
Emission Designator: 110KF3E
There are currently no reviews for this product, be the first to write one!