Cranborne Audio
500ADAT Expander, Summing Mixer, 8-slot 500 Series Rack
Additional Photos:
Product Videos :
500ADAT combines cutting-edge digital performance with tried-and-tested ADAT. The 500ADAT's high-current 8-slot 500 series chassis with digital conversion and ADAT is a powerful and accessible way to get your favourite analogue 500 series preamps, compressors, and EQs into your tracking and mixing digital workflow. Utilising high-end converters with 121dB (unweighted) signal-to-noise ratio and ultra-low jitter (< 0.5 picoseconds) internal clocking ensures that every subtle nuance of your analogue signal is captured perfectly and sent via ADAT to an interface of your choice.
ADAT, SMUX II/IV Expander
Transform your ADAT-equipped audio interface into an analogue powerhouse by adding up to 8 channels of expansion at up to 96kHz or 4 channels of expansion at 192kHz - while utilising the 500 series standard.
Zero-Latency Artist Mixer
Move away from clunky software mixers and get your hands back onto the mix by using 500ADAT's two aux busses to create pristine-sounding analogue artist mixes that can be blended with DAW playback, and sent to your musicians with zero-latency.
Discrete Summing Mixer
Give your mix the final bit of analogue character and send instrument groups and stems back-through your 500 series modules and into the discrete analogue summing mixer to be sent back into your DAW.
Portable, Dependable, and Made in the UK
Housed in a 4U, 19" rack mountable steel frame, 500ADAT lends it self perfectly to mobile recording setups. Designed with 3 rack-ear orientations, the 500ADAT will be well protected in a number of applications. You can recess 500ADAT into its rack ears to protect the front panel controls during travelling; you can also take those same rack ears and re-orientate them to become a carry handle.
Key Features
• 8in/8out ADAT Interface
Ultra low-latency ADAT Interface with SMUXII/IV transport.
8 channels at 44.1-96kHz, 4 channels at 192kHz.
• High-performance AD/DA conversion
ADCs = 121dB (unweighted) signal-to-noise ratio and - 112dB THD+N.
DACs = 127dB (unweighted) signal-to-noise and -115dB THD+N.
0dBFs = 26.5dBu for huge headroom when recording and the ability to drive modules for a wider range of effects.
• Master reference-quality internal clock
Capable of 44.1, 48, 88.2, 96, and 192kHz operation.
Sub 0.5 picoseconds of jitter.
Dedicated Word Clock Input and Output via BNC.
External sync options using Word Clock BNC, or ADAT.
• Analogue summing mixer
8-into-2 analogue summing mixer with 26.5dBu of headroom and dedicated balanced 1/4" jack outputs.
CAST link port for increased expandability when used with Cranborne Audio 500R8 (sold separately).
• Zero-latency artist mixer
Zero-latency analogue artist mixer with physical level/pan controls per channel and Aux Input blend controls.
2 high-power headphone outputs with independent blend and level controls
• High-current 8-slot 500 series rack
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| 500ADAT Expander, Summing Mixer, 8-slot 500 Series Rack | 701932 |
