ART Pro Audio Active DI Box

SKU: # 247840   |   Model: # XDIRECT   |    Product Reviews3 Reviews  Write a Review

Active DI Box
Notify Me

Buy Online

 Add to Cart

Buy In-Store

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The Input Attenuator switches allow for a wide range of signal levels and the Input Link jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

What further sets the Xdirect apart from other "Active DI" boxes are its extended features and versatility. We have added a switchable low pass Filter that cuts out all very high frequency interference. This Bessel filter on the input is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Xdirect as an interface between a computer based audio workstation and your monitors.

A Phase Invert switch, while not normally included with your run of the mill D.I. box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The Xdirect's active circuitry is powered by an internal 9volt battery, when external power is not available. In this mode it draws 3.5 ma which should give you more than 250 hours of operation off of a new battery. If phantom power is available, then the Xdirect will automatically draw its power from the external source. The Battery on/off switch lights dim when the unit is running off of the battery, lights brightly when it is running off of phantom power, and is off when the unit is inactive.

The compact black anodized all aluminum case and its flexible power design allow the Xdirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. Its full feature set, rugged construction, and high-end specifications make the Xdirect the obvious choice whenever you have to interface high impedance sources with a low noise balanced system.

SPECIFICATIONS:
• Frequency Response: 10Hz 100kHz, +/-.5dB @ +0dBu
• Maximum Output Level: +6dBu (battery powered)+14dBu (phantom powered)
• Maximum Input Level: +4/+24/+44dBu
• Dynamic Range: >100dB typical
• Input Connections: 1/4 TRS and XLR female unbalanced, 470k Ohm
• Output Connection: XLR male balanced,

Q & A


There are currently no questions for this product.

Reviews


18.207.255.67
CCBot/2.0 (https://commoncrawl.org/faq/)
Good box for the price 1 of 1 customers found this review helpful
Features  
Quality  
Value  
Overall  
Product Experience   I own it
Closest Store   Mississauga, Ontario
Some older reviews mention the fragility of the device, I did not have the broken jack issue yet. I have seen lots of people kick and toss their DI boxes while playing, I am careful with all my equipment! I use it to connect my keyboard or guitar to a mixer and it's all good. The phantom power feature saves on the batteries. Good box for the price.
Posted by François on May 20, 2022
Was this review helpful? Vote helpful Vote not helpful flag this review
Bad Design 5 of 5 customers found this review helpful
Features  
Quality  
Value  
Overall  
Product Experience   I own it
Closest Store   St. John's, Newfoundland and Labrador
As with the review above I bought 4 of these. They worked great for the price for a little while and then the problem started. The 1/4 inch input breaks off on the PCB on ALL 4!! This problem will happen to you!! These were lightly used. So when I tried to repair them I noticed that the tracks on the PCB were very thin and not up to the job of holding an input connector. Bad design. So I had to re track most of the unit . Would not buy again. Save you money now but will cost you in the long run. Not to mention make you look bad when it doesn't work mid concert.
Posted by Stephen Genge on Feb 7, 2017
Was this review helpful? Vote helpful Vote not helpful flag this review
Lost connections 1 of 1 customers found this review helpful
Features  
Quality  
Value  
Overall  
Product Experience   I own it
Closest Store   Bedford, Nova Scotia
I purchased the Art pro Active DI to use for live performances. I only got to use it a few times during jam practices and it began to lose the connection on the 1/4" input. The input became loose. The 1/4" jack is only soldered to the internal board, it's not secured to the box. Not the toughest product, but for the price can't expect the best. However Long and Mcquade were very understanding and took the DI back. Thanks
Posted by wayne grimes on May 9, 2016
Was this review helpful? Vote helpful Vote not helpful flag this review

Rental rates


This product is normally available for rental. Please contact your preferred location for further information.

1 Day from $2.00

1 Week $3.00

1 Month $6.00

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.