Behringer NX6000D Ultra-Lightweight 6000-Watt Class-D Power Amp with DSP

Departments > Pro Audio & Recording > Power Amps & Crossovers > Outboard - Power Amplifiers > Behringer > NX6000D Ultra-Lightweight 6000-Watt Class-D Power Amp with DSP
SKU: # 697696
Model: #


This product is no longer available.
The NX6000D power amplifier packs 6000 Watts (2 x 3000 Watts @ 4 Ohms; 2 x 1600 Watts @ 8 Ohms) into an exceptionally lightweight (13.2 lbs / 6.0 kg) and rack-mountable package. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NX6000D is so much more efficient than conventional designs, it runs cooler and doesn't require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to Behringer's "Zero-Attack" limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000D full-out for hours on-end. The revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.

• Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms and weighs less than 13.2 lbs / 6.0 kg
• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
• DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings
• SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
• Front panel LCD display enables setup and adjustment without PC
• Can be set up, controlled and monitored via rear panel USB connector. Powerful remote software downloadable at
• "Zero-Attack" limiters offer maximum output level with reliable overload protection
• Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
• Detented and illuminated gain controls for precise level setting
• Precise 4-segment Signal and Limit LEDs to monitor performance
• XLR and 1/4" TRS combination input connectors for compatibility with any source
• Professional twist-lock speaker connectors for ultimate reliability
• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
• "Back-to-front" ventilation system prevents thermal buildup for reliable operation


Maximum Output Power:
4 Ohms per channel, stereo: 2 x 3000 W
8 Ohms per channel, stereo: 2 x 1600 W

Input Sensitivity:
For rated power into 4 Ω: 0.775 V (0 dBu)

Digital Signal Processing (DSP):
Display: LCD 128 x 32, amber backlit
Digital delay function (per channel): 0 300 ms
Digital crossover function: 3 filter types, up to 48 dB/octave
Digital EQ function (per channel): 8-band parametric, 2-band dynamic equalizer
Digital dynamics function (per channel): Zero attack limiter (peak)
Presets: 20 total presets, 19 user-definable

Controls: Front Power switch, Gain controls (channels A and B), DSP section rotary push-encoder Buttons for Process, Setup, Up/Down, Exit

Inputs: 2 x combo jacks
Input Impedance: 10kΩ unblanced, 20 kΩ balanced
Outputs: 2x locking-style professional speaker connectors
Output circuit type: Class D
Distortion: < 0.2%
Frequency response: 20 Hz to 20 kHz, +0/-2dB
Damping factor: > 140 @ 8 Ohms
Signal-to-noise: > 100 dB
USB: Rear panel USB connector type B for remote control of DSP section

Circuit Protection:
Cooling: Continuously variable speed fan, Back-to-front air flow
Amplifier protection: Thermal and DC protection, Stable into reactive or mismatched loads
Load protection: On/off muting, DC-fault power supply shutdown

Power Supply, Voltage: Current Consumption: 120V~, 60 Hz, (T 24A H 250V)
Power consumption @ 4 Ω, 1/8 rated power: 620 W

Dimensions (H*x W x D): 94 x 483 x 316 mm (3.7 x 19.0 x 12.4")
*including 5mm rubber feet
Weight: 6.0 kg (13.2 lbs)
There are currently no reviews for this product, be the first to write one!