Audio-Technica

This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridges special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws no nuts required. Because all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Features
• VM95 Series dual magnet cartridge with 0.6 mil conical stylus
• Aluminum cantilever
• Specially wound coils increase output voltage
• Durable low-resonance polymer housing
• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws no nuts required
• Compatible with any AT-VMN95 replacement stylus

Specifications
Frequency Response: 20-20,000 Hz
Channel Separation: 18 (dB at 1 kHz)
Vertical Tracking Angle: 23 degrees
Vertical Tracking Force1.8-2.2 g (2.0 g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Coil Inductance: 550 mH (1 kHz)
Load Capacitance: 100 to 200 pF
Output: 4.0 mV (1 kHz, 5 cm/sec.)
Channel Balance: 2.5 dB (1 kHz)
Stylus Shape: 0.6 mil conical
Cantilever: Aluminum pipe
Mount: Half-inch
Weight: 6.1 g (0.22 oz)
Dimensions: 17.2 mm (0.68") H 18.9 mm (0.74") W 28.3 mm (1.20") D
Replacement Stylus: AT-VMN95C
Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers