Tascam
ML-32D 32-Channel Analog-to-Dante Converter
Additional Photos:
Product Videos :
ML-32D
A Powerful and Flexible SolutionThe TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.
The ML-32D has four D-Sub inputs and four D-Sub outputs, which can easily be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into or extracted from the Dante audio stream.
Primary and Secondary Network Connections Redundancy and Security
Primary and secondary connectors enable building a redundant system with a duplex network. Should the primary network route fails the ML-32D automatically switches to the secondary network route. This highly secure system prevents interruption and introduces no noise during the switch.
Integrated Signal/Overload Indicator
The front panel is equipped with a signal/overload indicator that enables monitoring of analog input/output signals. The signal indicator turns on when a signal level becomes lower than -60dBFs.
5 Selectable Reference Levels
The TASCAM ML-32D features selectable reference level setting from 5 maximum level options: +24dBu, +22dBu, +20dBu, and +18dBu (the standard level is +4dBu) and +15dBu (the standard level is +6dBu), which can accommodate to a variety of purposes including professional use in broadcasting studios, public address systems and recording environments.
Features
• Dante focused interface for connection of external audio into or out of a Dante audio network
• 32 channel analog line input and 32 analog line outputs (48k/96kHz) using eight D-Sub connectors
• Dual redundant Ethernet jacks which support both primary and secondary connections
- Dante primary and secondary connectors support redundancy
- AES67 and Ravenna compatible
- Dante Controller for flexible routing
• Up to 96kHz/24-bit quality
• Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
• Reference level dip switches for selectable DBu level metering
• LED display for signal level and overload per input/output channel
• Firmware updatable via Dante port
• Equipped with D-sub 25-pin connectors as line input/output connectors
• 1U rack mount size
Specifications
Formats
Sampling frequency: 44.1k / 48k / 88.2k / 96k Hz
Quantization bit rate: 16 / 24-bit
Line Inputs
Connector: D-sub 25pin female 2
Locking screws: No.4-40 UNC (inch type)
Nominal input levels: +4dBu, +6dBu (only when maximum input level is +15dBu)
Maximum input levels: +24dBu, +22dBu, +20dBu, +18dBu, +15dBu (set by REF. LEVEL switches)
Input impedance: 10kΩ or higher
Line Outputs
Connector: D-sub 25pin female 2
Connector: No.4-40 UNC (inch type)
Output impedance: 200Ω or lower
Applicable load impedance: 2kΩ or higher
Nominal output levels: +4dBu, +6dBu (only when maximum output level is +15dBu)
Maximum output levels: +24dBu, +22dBu, +20dBu, +18dBu, +15dBu (set by REF. LEVEL switches)
Primary/Secondary
Connector: RJ-45 2
Transmission protocol: Dante
Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
Cables: Category 5e or faster STP cables
Power
Requirements: AC 100 - 240V, 50/60Hz
Power consumption: 22W
Physical
Dimensions: 19.0" 1.77" 11.96" / 483 45 303.8 mm
Weight: 7.7 lbs. / 3.5 kg
Standard accessories: Power cord, Rackmount screw kit, Owner's Manual
Audio Performance
ANALOG IN - Dante OUT
Frequency response:
• 20Hz to 20kHz +0.1dB/0.5dB (16dBFS input, 44.1k/48kHz sampling frequency, JEITA)
• 20Hz to 40kHz +0.1dB/0.5dB (16dBFS input, 88.2k/96kHz sampling frequency, JEITA
Distortion (THD+N): 0.001% or lower (1dBFS input, 1kHz, 44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
S/N ratio: 113dB or higher (44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
Crosstalk: 115dB or higher (1kHz, 44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
Dante OUT - ANALOG IN
Frequency response:
• 20Hz to 20kHz +0.1dB/0.5dB (16dBFS input, 44.1k/48kHz sampling frequency, JEITA)
• 20Hz to 40kHz +0.1dB/1.0dB (16dBFS input, 88.2k/96kHz sampling frequency, JEITA)
Distortion (THD+N): 0.001% or lower (1dBFS input, 1kHz, 44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
S/N ratio: 110dB or higher (44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
Crosstalk: 115dB or higher (1kHz, 44.1k/48k/88.2k/96kHz sampling frequency, JEITA)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| ML-32D 32-Channel Analog-to-Dante Converter | 711313 |
