Departments > Pro Audio & Recording > PA Speaker Cabinets > Full Range Powered Speakers > QSC > KLA12 1000W 12'' 2-Way Active Line Array Loudspeaker - Black

QSC

KLA12 1000W 12'' 2-Way Active Line Array Loudspeaker - Black

SKU: # 441723   |   Model: # KLA12-B   |    Product Reviews0 Reviews  Write a Review

KLA12 1000W 12\'\' 2-Way Active Line Array Loudspeaker - Black

Additional Photos:

KLA12 1000W 12\'\' 2-Way Active Line Array Loudspeaker - Black
KLA12 1000W 12\'\' 2-Way Active Line Array Loudspeaker - Black
KLA12 1000W 12\'\' 2-Way Active Line Array Loudspeaker - Black
Your Price: $3,499.00 CDN
or from $162 CDN/mo

Buy Online

 Add to Cart

Buy In-Store

The KLA Series brings the power and sophistication of a line array system into an easy-to-use product. With its simple Lift, click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. This active line array system is ideal for a wide range of portable and permanently installed applications ranging from live entertainment to houses of worship or other venues where a line array system is desired.

Features
• Portable, fixed arcuate line array system
• 500 W + 500 W power amp module
• Rugged, ABS enclosure delivers light-weight durability
• High power, 12-inch low frequency driver provides extension down to 44Hz without subwoofers
• Extensive DSP further enhances and protects performance
• 1.75-inch diaphragm compression driver delivers clear and powerful high-frequency reproduction
• 90 x 18 degree nominal coverage (requires only five boxes to configure a 90 x 90 degree array)
• SOLO™ Rigging System supports deployment without tools or external hardware
• Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
• powerCON® Input and Thru connections
• Tilt-Direct™ pole mount assists directivity in single-unit applications

KLA12 Specifications
Configuration: Multipurpose 2-way
Transducers:
- High Frequency: 1.75-inch diaphragm compression driver
- Low Frequency: 12-inch cone transducer
Frequency Response (-6 dB): 49 Hz - 18 kHz
Frequency Range (-10 dB): 44 Hz - 20 kHz
Nominal Coverage: 90 H x 18 V
Maximum SPL (1 meter): 131 dB peak

Amplifiers
Power Output
- HF: 500 W Class D continuous
- LF: 500 W Class D continuous
Input Impedance: XLR: 40 kΩ balanced / 20 kΩ unbalanced
Controls: Power, Attenuation, LF Setting (External Sub/Normal/DEEP™), Array Size (1-5), Front LED (Pwr/Limit/Off)
Indicators: Power, Signal, Standby, Limit
Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
Cooling: On demand, 50 mm variable speed fan
Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input: Universal power supply 100240 VAC, 50 to 60 Hz
AC Power Consumption (1/8 Power):
- 100 VAC, 2.3 A
- 120 VAC, 2.01 A
- 230 VAC, 1.13 A

Enclosure
Material: Impact resistant ABS
Finish: Black or white paint
Grille: Rugged powder coated steel grille
Dimensions (HxWxD): 15.0 x 23.4 x 16.6 inches (382 x 594 x 422mm)
Net Weight: 55 lb / 25 kg

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.