PreSonus Eris E5 XT 2-Way 5'' Active Studio Monitor with Wave Guide (Single)
Additional Photos:
Product Videos :
Studio Speakers with a Wide Sweet Spot
The Eris XT studio monitors are outfitted with a new EBM (Elliptical Boundary Modeled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind PreSonus' award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It's ideal for group listening and collaboration-while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.
Lows That Go Lower
The familiar woven composite low-frequency driver still offers Eris' signature tight, clear bass; plenty of punch and no flub. Eris E5 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 48 Hz. That's 10 Hz below previous models-with no subwoofer required!
Studio Monitor Connections
It's easy to feed audio to your Eris E5 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E5 XT monitors provide balanced XLR, balanced 1/4" TRS, and unbalanced RCA line-level inputs. You'll have no problem hooking your Eris speakers up to virtually anything.
Features
Construction
• 5.25-inch woven composite low-frequency transducer
• 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
• Front-firing acoustic port for superior bass-frequency reproduction
• Optimized, resonance-suppressing internal bracing
• 102 dB maximum continuous SPL
Controls
• HF Adjust (+/-6 dB, continuously variable)
• Midrange Adjust (+/-6 dB, continuously variable)
• Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
• Highpass filter (Off, 80 Hz, 100 Hz)
Power
• 70 watt, Class AB biamplification
• Amplifier "soft start" feature eliminates popping on power-up
• Internal power supply with IEC connector
Specifications
Inputs:
• 1- Balanced XLR
• 1- Balanced 1/4" TRS
• 1- Unbalanced RCA
Performance
Frequency Response: 48 Hz - 20 kHz
Crossover Frequency: 3 kHz
LF Amplifier Power: 45W
HF Amplifier Power: 35W
Peak SPL (@ 1 meter): 102 dB
LF Driver: 5.25"
HF Driver: 1" silk dome
Input Impedance: 10 kΩ
Dispersion: 100 degrees horizontal by 60 degrees vertical
User Controls
Volume Range: A-type taper
MF Control: -6, 0, +6 dB
HF Control: -6, 0, +6 dB
Low Cut: Flat, 80 Hz, or 100 Hz
Acoustic Space: Flat, -2 dB, or -4 dB
Protection
• RF interference
• Output-current limiting
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• External mains fuse
Power
100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Cabinet
Vinyl-laminated, medium-density fiberboard
Physical
Dimensions: 11" x 9" x 8" (279.4mm x 228.6mm x 203.2mm)
Weight: 11 lbs (4.99 kg)
Media
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.