Heritage Audio

2264JR 500 Series Compressor and Microphone Preamplifier

SKU: # 721436   |   Model: # HA2264JR   |    Product Reviews0 Reviews  Write a Review

2264JR 500 Series Compressor and Microphone Preamplifier

Additional Photos:

2264JR 500 Series Compressor and Microphone Preamplifier
 This product is no longer available.
The 2264JR is a 2 slot 500 series Compressor and Microphone Preamplifier, based on the classic diode bridge principle.

Its compression features, key components and design are the same found on the Heritage Audio classic 2264E compressor. A fully featured 60dB HA1073 mic preamplifier has been implemented when compression is not needed. Phantom power is also available.

Its audio path is fully discrete Class A, 2n3055 driven, transformer balanced. All controls are stepped on rotary switches for easy recall and high precision. A high pass filter has been added on the sidechain to avoid bass signals to ride the compression.

It features discrete inputs for Compression / Line amp (Left slot input) and mic (Right slot input). Output in both cases is on the Left slot output.

Features/Controls
Gain Reduction Meter: Shows the compression amount up to 20dB.
DYN Switch: Enables compression functions.
High Pass Switch: Enables high pass filter on the sidechain circuit.
MIC Switch: Enables Mic input and overrides Compression / Line input functions.
Compress Recovery Switch: Switches between 6 time constant options, 100ms, 400ms, 800ms, 1500ms, Auto1 (100ms on peaks, 2secs on program material) and Auto2 (50ms on peaks, 5secs on program).
Compress Threshold Stepped Control: Sets the minimum level at what compression happens, from +12dBU down to -12dBm in variable "smart" steps).
Compress Ratio Switch: Allows the user to choose between 5 different compression ratios, 1.5, 2, 3, 4and 6:1, and a LIM option.
MIC Gain Stepped Control: In 5dB steps from 35 to 60dB.
Gain Makeup Stepped Control: In 2dB steps from 0 to 20dB.
LINK Switch: Allows the module to be linked to compression bus.

Specifications
Microphone input impedance: 1200 Ohm .Input is transformer balanced and floating.
Line input impedance: 10KOhms bridging, transformer balanced and floating.
Output impedance: Less than 75 Ohms, transformer balanced and floating, 600 Ohms terminated.
Maximum output: Greater than +26dBu, 600 Ohms terminated.
THD: Less than 0.025% at 1Khz, Less than 0.05% at 100Hz.
Frequency response : 20Hz (+0.3dB) to 20Khz (-0.2dB).
Maximum Microphone Gain: 60dB.
Maximum Line Gain: 20dB.
Maximum Power consumption: Less than 110 mA @+-16VDC.

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions