Departments > Guitars > Electric Guitars > Electric 6 String > Gibson > SG Special 70s Tribute - Worn Silverbust

Gibson SG Special 70s Tribute - Worn Silverbust

SKU: # 371291   |   Model: # SGSP70WLCH   |    Product Reviews0 Reviews  Write a Review

SG Special 70s Tribute - Worn Silverbust

Additional Photos:

SG Special 70s Tribute - Worn Silverbust
SG Special 70s Tribute - Worn Silverbust
SG Special 70s Tribute - Worn Silverbust
 This product is no longer available.
Rock music might have developed through the 1960s, but it came of age in the 1970soften played on great Gibson guitars of the era. To capture the look, feel and tone of the instruments that made massive music during a decade when rock was king, Gibson USA introduces the SG Special 70s Tribute, part of a series that also includes a Firebird Studio and Les Paul Studio with complementary features. The SG Special 70s Tribute offers all the quality and performance that has made the guitar so popular with hard-gigging guitarists since its introduction in 1983, with crucial updates that ally it to many legendary Gibson guitars of the 1970s. Wrap your hand around the unique thin-to-thick neck carve of the SG Special 70s Tributewith a profile that starts out slim at the lower frets and becomes increasingly chunky as you slide toward the jointand youre rocketed straight back to an age of fierce, fast soloing. In the tone department, it carries a pair of new Dual Blade Alnico Mini Humbuckers for great, vintage-edged tones with plenty of contemporary versatility. To top it off, the SG Special 70s Tribute looks great in your choice of Vintage Sunburst, Cherry, Ebony Black or Silver Burst finish, all in grain-textured satin nitrocellulose lacquer.

Details
Body
Species - Mahogany

Neck
Species - Maple
Profile - Unique '70s, Thin-To-Thick with Volute
Truss Rod - Traditional Adjustable
Joint Angle - 5 (+/- 15 seconds)

Neck Fit
Joint - Mortise & Tenon
Adhesive - Franklin Titebond 50
Joint Angle Tolerance - +/- .005"

Fingerboard
Species- Baked Maple
Frets -22
Radius - 12"
Scale Length - 24.75"
Nut/E.O.B - 1.695"/2.260"
Inlays 0- Acrylic Block

Nut
Material - Corian
Width -1.695 in.
Slots 0- Gibson PLEK System

Headstock
Logo - Gold "Gibson" Logo (Silver on Silverburst)
Truss Rod Cover - Black and White Antique Bell

Pickups
Neck Position - Dual Blade Alnico Mini Humbucker (Alnico II Deluxe)
Bridge Position- Dual Blade Alnico Mini Humbucker (Alnico II Deluxe)

Electronics
Potentiometers - 2 Volume Controls2 Tone Controls
Type - 500k Linear Volume, 500k Non-linear Tone
Coil Wiring - Machine Wound
Toggle Switch - Three-way Switchcraft with Black Plastic Tip (Cream Tip on Ebony and Vintage Sunburst)
Output Jack - Traditional 1/4"

Bridge
Type - Tune-o-Matic
Plating- Chrome

Tailpiece
Type - Stop Bar
Plating- Chrome

Hardware
Knobs - Black Top Hats on Cherry and Silver Burst, Gold Top Hats on Ebony and Vintage Sunburst
Pickguard - Black on Cherry and Silver Burst, Cream on Ebony and Vintage Sunburst
Toggle Switch Washer - Black on Cherry and Silver Burst, Cream on Ebony and Vintage Sunburst
Pickup Mounting Rings - Black on Cherry and Silver Burst, Cream on Ebony and Vintage Sunburst
Control Plate Cover - Black Plastic
Strings - .010 - .046, Genuine Gibson strings
Strap Buttons - Aluminum

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.