Departments > Guitars > Electric Guitars > Electric 6 String > Gibson > Grace Potter Signature Flying V

Gibson Grace Potter Signature Flying V

SKU: # 374607   |   Model: # DSVGPNOCH   |    Product Reviews0 Reviews  Write a Review

Grace Potter Signature Flying V

Additional Photos:

Grace Potter Signature Flying V
Grace Potter Signature Flying V
Grace Potter Signature Flying V
 This product is no longer available.
To capture the tonal splendor of this well-crafted guitar, Gibson USA loads the Grace Potter Signature Flying V with a pair of its finest PAF recreations. The BurstBucker Pro Rhythm at the neck and BurstBucker Pro Lead at the bridge are both made with Alnico V magnets and wound with 42 AWG enamel-coated wire like many of the best original PAFs. They provide output levels in line with vintage humbuckers, although the bridge pickup is given extra turns of wire for a little more grind in the lead position and an excellent balance between the two. Also, in a contemporary twist, both pickups are wax potted to combat microphonic feedback, so you can crank this sweet, soulful tone monster through your amp of choice, achieving everything from warm, rich, bluesy tones to wailing lead and crunching rhythm, without fear of howl or squeal. The classic pairing of Tune-o-matic bridge and stud-mounted stopbar tailpiece keep it all locked down for maximum sustain and easy intonation adjustment, and a pair of individual volume controls, a master tone, and a three-way switch give you all the sonic versatility required.

Specifications:

Body
Species - Mahogany
Binding - Cream

Neck
Species - Mahogany
Profile - Thin V
Truss Rod - Traditional Adjustable
Joint Angle - 3.5 (+/- 15 seconds)

Fingerboard
Species - Chechen
Frets - 22
Radius - 12"
Binding - Cream
Nut/E.O.B - 1.695"/2.260"
Inlays - Acrylic Dot
Scale Length - 24 3/4"

Headstock
Type - Flying V
Truss Rod Cover - Cream/Black/Cream Hotstamp Gold Gibson

Finish
Sealer - Nitrocellulose
Surface Texture - Lacquer Top/Satin Back, Sides and Neck
Process - 1-1.5 mils

Pickups
Neck Position - BurstBucker Pro(Alnico V)
Bridge Position - BurstBucker Pro(Alnico V)

Electronics
Potentiometers - 2 Volume Controls1 Tone Control
Type - 300K Linear Volume, 500k Non-linear Tone
Coil Wiring - Machine Wound
Toggle Switch - Three-way Switchcraft with White Plastic Tip
Output Jack - Traditional 1/4"

Bridge
Type - Tune-O-Matic
Material - Zamak
Plating - Chrome

Tailpiece
Type - Stop Bar
Material - Zamak
Plating - Chrome

Tuners
Model - TonePros Kluson
Plating - Chrome
Tuning Ratio - 16:1

Nut
Material - Corian
Width - 1.695
Slots - Gibson PLEK System

Hardware
Knobs - Vintage Amber Top Hat
Pickguard - Lexan Painted Cream with Silkscreened Artwork
Strings - .010 - .046, Genuine Gibson strings
Strap Buttons - Aluminum

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
  • USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.