Lauten Audio

LA-220 Large Diaphragm FET Condenser Microphone

SKU: # 737184   |   Model: # LA-220   |    Product Reviews0 Reviews  Write a Review

LA-220 Large Diaphragm FET Condenser Microphone

Additional Photos:

LA-220 Large Diaphragm FET Condenser Microphone
 This product is no longer available.
The Series Black LA-220 large diaphragm FET studio condenser microphone by Lauten Audio is a professional and versatile microphone for studio vocal and instrument recording. At its core the LA-220 features a U.S. made ultra-low-noise JFET amplifier, a 1" pressure gradient true-condenser capsule with cardioid polar pattern, independent 120 Hz low-cut and 12 kHz high-cut filters, and a transformer balanced output. The low-cut filter helps reduce boomy lows or low-end room rumble; the high-cut filter helps to tame bright rooms and sources. These features help you to achieve excellent recordings regardless of your skill level.

Designed for the budding the recordist, the LA-220 is the best entry into professional quality recordings with a professional studio microphone. It's easy to use and affordable for anyone to get serious about their sound.

Features
• Professional level vocal and instrument condenser microphone
• Ideal for creating vibrant modern vocals
• High-cut filter tames bright sources
• Low-cut filter removes room rumble and muddiness
• Ultra-low-noise USA JFET amplifier for superior solid-state sound
• 1" capsule reminiscent of classic German mics
• Vintage inspired transformer balanced output

INDEPENDENT FILTERS CLEAN YOUR TONE
The high and low cut filters make solving common problems in home, basement or bedroom recording environments easy. The LA-220 features two independent filters located on the microphone and easy to engage via switches located on the front. If the room or source is boomy, or you have low-end rumble from outside sources like road noise, furnace, air conditioner etc., turn on the low-cut filter and eliminate the problem. Want to get away from the "harsh" tone you hear about? Then use the high-cut to roll-off above 12k and tame your source. What's even cooler is you can use both filters at the same time making this microphone extremely versatile and your solution to problems before the recording hits your hard drive.

READY FOR RECORDING
Each LA-220 microphone includes a spider shock mount to isolate the microphone from vibrations, and a soft sleeve to keep your microphone safe and clean when not in use.

Specifications
Type: 1 inch dual large diaphragm pressure gradient transducer microphone.
Polar Patterns: Cardioid
Circuit: JFET transistor with transformer balanced output
Frequency Range: 20Hz-20KHz
Dynamic Range: 120dB minimum
Impedance: < 200 ohms
Max. SPL: 0.5% THD @1000Hz: 130dB
Self-noise Level: < 15dB-A
Sensitivity: 16mV/Pa -40dB (0 dB=1V/Pa 1kHz)
Special Features: Selectable, independent 120Hz low-cut & 12 kHz high-cut filters
Connector: 3-pin XLR
Power Requirement: +48v Phantom power

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions