Maxon Real Tube Overdrive-Distortion Pedal
Great Additions
Description
Every aspect of the RTD800 has been re-thought and redesigned to provide a lifetime of trouble-free performance. As soon as power is applied to the pedal, an In-Rush Current Control circuit begins heating the tube at a very low voltage (much like a tube amp standby switch) to dramatically extend tube life. When the pedal is engaged, a charge pump circuit bumps incoming voltage to feed the tube with 12.6 VDC.
The selectable Overdrive and Distortion modes are configured as follows:
The Overdrive circuit features two stages of clipping - a bi-directional clipping diode in the feedback loop of the op-amp and then a single-diode in the second stage for asymmetrical clipping.
The Distortion circuit also features two clipping stages, but configured differently - a bi-directional clipping diode in feedback of op-amp for stage 1, and then a 2nd stage with a passive bi-directional clipping circuit.
Unlike other tube overdrive pedals, the RTD800 places the tube AFTER the OD/Distortion circuits, making it the best tube overdrive pedal to recreate an authentic tube-amp tone.
Gain and Master Controls allow the user to dial the amount of distortion and output level. The three Tone controls are completely independent with no frequency overlap, allowing for an unprecedented degree of tonal options.
Everything is kept clean and tight via the variable VCA Noise Reduction circuit, which features an LED status indicator and On/Off switch.
In addition, the RTD800 features a Footswitchable Boost function that can be varied between 3-9 dB via an internal trim pot.
The RTD800s Front-Panel Controls are as follows:
GAIN - Controls Gain level.
MASTER - Controls output level allowing user to match effect and bypass levels
BASS - Controls low frequency range.
MID - Controls middle frequency range.
TREBLE - Controls high frequency range.
OD/DIST - Switches between Overdrive and Distortion modes.
NR - Controls amount of Noise Reduction when NR is switched on.
NR ON/OFF - Turns Noise Reduction on/off.
BOOST ON/OFF - Engages Boost function.
Like all Maxon products, the RTD800 features True Mechanical Bypass switching using a 3PDT switch. The RTD800 comes complete with the Maxon AC2009 9-Volt power supply, an auto sensing digital power supply that can be used anywhere in the world.
When you require an unparalleled variety of REAL-tube tones, only the Maxon RTD800 will do.
Q & A
Reviews
RTD800
0 of 0 customers found this review helpful
RTD800
0 of 0 customers found this review helpful
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Real Tube Overdrive-Distortion Pedal | 382221 |
