Opens in a new window
Groove Juice
Cymbal & Hardware Cleaner 8 Oz.
Groove Juice Cymbal Cleaner is the original spray on rinse off cymbal cleaner an easy to use no mess cymbal cleaner. Simply spray the product on the cymbal surface and wipe with a soft cloth or paper towel along the tonal grooves making sure cleaner is distributed evenly and leave on for approximately 30 seconds. Then rinse with warm water to remove all residue of the cleaner and towel dry the cymbal completely to remove all moisture.
Cymbal Cleaner Intended Usage:
Groove Juice Cymbal Cleaner was formulated for use on high quality professional bronze cymbals.
Groove Juice cymbal cleaner is intended to be used as a cymbal maintenance. To restore the brightness of your cymbals quickly and easy by removing dirt and smudges.
Not for use on coated cymbals.
Cymbal Cleaner Intended Usage:
Groove Juice Cymbal Cleaner was formulated for use on high quality professional bronze cymbals.
Groove Juice cymbal cleaner is intended to be used as a cymbal maintenance. To restore the brightness of your cymbals quickly and easy by removing dirt and smudges.
Not for use on coated cymbals.
Q & A
There are currently no questions for this product.
Reviews
3.140.185.147
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
Very bad product 0 of 2 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Richmond, British Columbia
This cymbal cleaning solution is too strong for my cymbal. It killed my $900 Meinl Byzance Hi-hat. NOT recommend to anyone.
Posted by Curtis on Feb 10, 2023
FAST AND EFFECTIVE ON B20 CYMBALS 0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I've tried it
Closest Store Markham, Ontario
It worked on my fingerprinted and dirty 18 inch Wuhan China Crash cymbal.
1. Rinse with cool water
2. Sprayed Groove Juice on to one side
3. Lightly spread with a microfiber cloth
4. Wait 30 seconds
5. Rinse with cool water
6. Repeat
7. Wipe dry until no residue is seen on towel
Logos did not come off. Cymbal was shiny. Sound decay was longer.
Not recommended for coated surfaces.
Posted by Peter on Oct 4, 2020
Cleaning cymbals has never been easier! 2 of 2 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Halifax, Nova Scotia
I have used other products like Brasso and Wenol for years with great results after a lot of elbow grease and re-application.
Groove juice made my cymbals shimmer with little effort.
Tough spots should be "toothbrushed" and logos avoided (unless you want them removed) to get the best results.
It was worth every penny!
Make sure to use this product with either a face mask or outside because the organic acid will take your breath away.
Posted by Kelly Mercer on Jun 8, 2017
The best cleaner on the market 1 of 1 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Courtenay, British Columbia
I have been using Groove Juice for around 20 years now, and after trying many other products, this just works. If you can't clean your cymbals with this stuff, they can't be cleaned.
Posted by Jacob Gregory on Mar 26, 2016
Great Product 0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Edmonton South, Alberta
Cleaner works well with water. Apply as directed: spray and rub cleaner lightly on the cymbal and rinse off with cold water. Wipe the cymbal dry to take off any remaining cleaner/water residue. Otherwise, an orange haze may appear if allowed to dry.
Cleaner will not remove logos if you use the cleaner with cold water. Using warm/hot water with the cleaner will remove it for sure. Keep the cymbal cool during cleaning to avoid removing logos.
Posted by anonymous on Dec 16, 2015
Works well and saves time cleaning 2 of 2 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Calgary Chinook, Alberta
Product works as advertised. Ideally best to do it outside as it has fumes. Spray on to the cymbal and use a cloth/paper towel to lightly rub the product all over the cymbal. Rinse immediately with water (i use a garden hose to pressure wash) and quickly dry the cymbal with a cloth/paper towel.
Do not allow the cymbal to self-dry. Leftover groove juice may leave a hazy stain when it drys. Wipe off after rinsing.
Used on sabians (brilliant & trad finishes) and a zildjian brilliant (A sweet ride). Does not remove logos. Note: I only rub the product by hand.
Overall, cleans the cymbal in less time than using polish. Works more effectively than any other spray (sabian) I have used in the past.
Posted by anonymous on Oct 7, 2015
Wow! 1 of 1 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Oshawa, Ontario
Great stuff - used it on an especially dirty cymbal for the first time and it looked better than new after just a minute! Be careful though, I heard about its tendency to remove logos, so I took precaution and applied masking tape over the logos during the process; they remained untouched. Buy this! Better than the other brands.
Posted by anonymous on Jun 26, 2013
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Cymbal & Hardware Cleaner 8 Oz. | 54996 |
