Samson Auro D1200 700W Active Subwoofer

Additional Photos:
Samson's Auro D1200 Active Subwoofer provides powerful lows that let audiences not only hear, but "feel" the bass. The Auro D1200 packs heart-thumping power in an efficient enclosure that weighs just over 40 pounds, making it ideal for fixed installations, DJs and sound reinforcement applications. The Auro D1200 Active Subwoofer goes where low-end is a must.
The Auro D1200 features a 12" long excursion low frequency driver and a built-in amplifier that produces 700 watts of output power. Signal, Limiter and Protect indicators offer constant monitoring of the amplifier. Its variable low pass filter control allows you to properly tune the subwoofer for specific applications, while the system's Polarity switch can be used to ensure that the subwoofer is in phase with the rest of your PA system. The Auro D1200 also features balanced stereo XLR-1/4" combo inputs, parallel XLR outputs and a 3-position (Normal, Deep, Boost) DSP contour control.
A roadworthy design, the Auro D1200 is constructed of solid 5/8" plywood with a professional textured paint finish. The enclosure also features two large ergonomic carry handles that make transport a breeze, as well as a 1 3/8" pole mount receptacle.
Easy to move and built to last, the Auro D1200 Active Subwoofer provides the super tight and punchy low frequency output that completes your Auro PA setup.
Features
• Lightweight, compact Class D active subwoofer, weighing just over 40lb
• 12" long excursion low frequency driver
• 700 watts of output power
• Balanced XLR-1/4" combo inputs
• Parallel XLR outputs
• Signal, Limiter and Protect LED indicators
• Variable low pass filter control
• 3-position (Normal, Deep, Boost) DSP contour control
• Polarity switch
• Solid 5/8" plywood enclosure with textured paint finish
• Integrated 1 3/8" pole mount receptacle
• Two large ergonomic carry handles
Specifications
Power: 700 watts
Design: Class-D
Driver: 12" Paper cone, 2.5" Voice coil diameter
Sensitivity: 95dB SPL @ 1w/1m
Frequency Response: 45 Hz - 200 Hz (+/-3 dB)
Max. SPL (700 watts): 126 dB SPL @ 1m
Crossover Type: 24 dB/oct Linkwitz-Riley
Crossover Frequency: 80 Hz - 200 Hz
Inputs (A & B): Balanced Female XLR / 1/4" Combo - Line Level
Thru Outputs (A & B): Balanced Male XLR - Line Level
Controls: Master Level Rotary, DSP Switch, Phase Switch, LPF Rotary
Indicators: Signal, Limiter, Protect
Power Consumption: 800 W max.
AC Connector: 3-pin IEC 250 VAC, 20 A Male
Fuse: 250V / T5AH
Enclosure: 15mm plywood, Textured black finish
Handles: 2 xx Steel
Grill: Perforated Steel
Mounting Method: Integral 1-3/8" (35mm) Pole Mount Receptacle
Dimensions: 15.55"19" x 18" / 39.5 x 48.4 x 45.7 cm
Weight: 42 lb / 19 kg
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.