Millennia Media HV-316 16-Channel Remote Rackmount Dante Microphone Preamp

Departments > Pro Audio & Recording > Signal Processors, Converters & Preamps > Millennia Media > HV-316 16-Channel Remote Rackmount Dante Microphone Preamp
  Add to Wish List
SKU: # 742871
Model: #


Your Price: $6,850.00 CDN
2 models to choose from:


 Add to Cart


• 8 or 16 channels of pristine Millennia HV-3 microphone preamplifiers in a road-hardened 1U chassis
• Effortless, vividly realistic, dynamically uniform HV-3 musical performance
• Both 12VDC (battery) and 80-264VAC worldwide powering
• Redundant power supply capability for fail-safe, glitch-free operation
• Paralleled next-generation AKM A-to-D conversion assuring > 130dB dynamic range
• Designed for ultra-high-temperature continuous operation (65C / 150F)
• RF "pi filter" shielding provided on analog and digital feeds, destroys mobile interference
• Control up to 256 channels at once via Dante Ethernet.
• +34dBu input headroom for use in the most extreme audio environments
• Matched discrete-octet transistor gain topology, the classic Millennia HV-3 double-balanced circuit
• AElogic Windows third-generation software offers total control for both HV-316 and HV-3R on the same network
• High-definition meters, grouping, linking, scene management, temperature monitoring
• Entirely balanced audio path with precision components maintains signal integrity: THD under 10 PPM ( < .001%)
• All channels matched to 0.08 dB
• Advanced power supply rated for 650,000 hours MTBF operation
• Aluminum 16-gauge rack chassis, ultra-lightweight, just 10 pounds
• Gorgeous NC-machined and hand-polished front-panel billet aluminum

Minimum Gain: 1 dB
Maximum Gain (1 dB per step): 64 dB
Attenuator Pad: -20 dB
Frequency Response (analog output option) (+0 / -3 dB): sub 3 Hz to beyond 300 kHz
Noise (60 dB Gain, 10 Hz - 30 kHz, Inputs common): -130 dB EIN
Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz - 20 kHz bandwidth, 0 dBFS Out: < .005%, Typ.
Intermodulation Distortion (50 Hz & 7 kHz), 35 dB Gain, 0 dBFS: < .0009%
Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, 0 dBFS: < 2 degrees deviation
Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.): > 65 dB, Typ > 85 dB
Slew Rate (35 dB Gain): > 25 Volts per microsecond
Maximum Input Level (20 Hz - 40 kHz): +34 dBu (pad in)
Maximum Output Level (20 Hz - 40 kHz): +22 dBu (analog output option)
Phantom Input Impedance (1 kHz): 6,750 ohms
Output Impedance: 24.3 Ohms (analog output option)
Phantom Powering: +48 V dc, +/- 2 V dc, 15 ma per channel in reserve
Power Consumption:
• 100 watts maximum
• AC: Universal 90-240V, 50/60 Hz
• DC: 12V
Physical Layer: Ethernet
Connectors: Dual RJ-45
Cable Quality: CAT-5e or better
Transmission Speed: 1Gbps
Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Minimum Dante Latency: 250 S
Supported Modes: Redundant / Switched
AES67 Support: Planned
• FCC CFR 47 Part 15 Subpart B, Class A
• ICES-03 Issue 6 (Canada)
• ANSI C63.4-2014
• CE (EN55022 / EN55024)
• RoHS 2002/95/EC
• WEEE 2012/19/EU
Environmental: -10⁰ to +65⁰C / +15⁰ to +150⁰F (10% to 80% RH)

*16-Channel model shown for display purposes.
There are currently no reviews for this product, be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.