Yorkville Sound Elite Series Powered Speaker - 15 Inch / 2 Inch - 1000 Watts - Long & McQuade Musical Instruments
  Main Menu

Yorkville Sound Elite Series Powered Speaker - 15 inch / 2 inch - 1000 Watts

Departments > Pro Audio & Recording > PA Speaker Cabinets > Speakers - Full Range-Powered > Yorkville Sound > Elite Series Powered Speaker - 15 inch / 2 inch - 1000 Watts
Add to Wish List
SKU: # 85212
Model: #

EF500P

Your Price: $1,499.00 CDN

Limited stock available in select stores only

The EF500P redefines performance in a high-power professional active loudspeaker enclosure. Utilizing the popular lite EF508 as a base, and adding a total of 1000 watts (program) of bi-amped power and advanced signal processing, the EF500P is destined to set a new standard for active loudspeaker design. The woofer or low frequency amplifier uses Class D switching technology to reduce overall weight of the amplifier section. This solution allows the horn to produce loud clean transients to keep up with the high output of the woofer. The two-tier amplifier technology isn't typically seen in a product like this, however we found the advantages (lower weight, more efficiency, higher headroom and lower operating temperature) made it a perfect choice for powering the top end.

This combination of amplifier technologies keeps distortion to a minimum while reducing the heat dissipation to a level low enough to eliminate the need for heavy heatsinks for the overall power stage. As an additional advantage, our unique combination of two-tier and Class D amplification has reduced extraneous heat to the point that EF500P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. We have found that competitive active loudspeakers with large finned heatsinks need to be operated vertically and with clearance to ensure proper heat dissipation and ventilation. Since the EF500P is ideal for flying in large clusters and in point source concert sound systems, our designers took extra care making sure that in tight clusters overheating would not be an issue.

EF500P - Mixer / Amplifier Module

We've also found an opportunity to tweak the electronics for maximum overall speaker performance and protection. Borrowing some ideas from our powerful and popular TX Series PA systems, the limiters used in the input and crossover stages are a complex combination of gain reduction and sweeping filters. As the EF500P is being pushed to its maximum input / output levels, it's advanced filtering begins rolling off unnecessary subsonic frequencies. In addition the processing protects the individual components ensuring failure free operation even after long term operation at close to maximum output levels. The filter has remarkable (less than 70ms) response times, allowing the system to constantly be retuning itself to make sure the output is as clean, as loud and as clear as possible at any given moment. This is achieved without negatively affecting the overall sonic quality of the cabinet. This ensures that the essential part of any mix, like the vocals or solo instruments, come out clean and clear when the cabinet is being operated at the extremes of power and woofer excursion. Extremely fast and accurate limiting is in place to protect the speaker components.

The EF500P has a built in mixer allows the loudspeaker to be used directly with a microphone and / or line source. The loop output allows additional active cabinets to be driven from one cabinet's mixer stage, or a series of cabinets to be driven from one source. If desired, the end user can combine a pair of the EF500P's using the mixer inputs on each cabinet and coupling the loop outputs. In this simple example you would have the ideal presentation system with two microphone inputs, two line inputs optimized for CD, Cassette or laptop computer audio source, complete within two speaker cabinets. Many of our active cabinets can be linked together but a maximum of three 'mixers' can be active at any one time. (Making three mic sources and six line sources available in any three or more cabinet array). The microphone input has equalization and high pass filtering appropriate for vocal applications. The trim control allows looped cabinets to be individually adjusted in level. This is invaluable in applications where large numbers of cabinets are used such as clusters or in trade show applications or when EF500P's are used as repeater cabinets or for side fill. The 100 Hz high pass filters allows the EF500P to be used more efficiently with any active subwoofer.

Features:
• Strong plywood cabinet patterned after our proven EF508
• Ultra-clear reproduction throughout bandwidth
• Lightweight, high efficiency, high tech, 800 Watt Bi-amped power module
• Proven TX style processing and component protection
• True 2" Exit/3" Titanium diaphragm horn driver
• Proven low distortion / high power handling 15" woofer
• +/- 6dB input trim control for individual cabinet level adjustment
• XLR and TRS inputs / outputs for easy connection and looping
• Multi-input source mixer for direct inputs
• Direct microphone input with level control
• Two way overall EQ controls
• Integrated flying hardware (3/8" threaded holes)
• Tough, full length metal grille
• Recessed Mixer panels

Specifications:
• System Type: 2-Way
• Active or Passive: Active
• Program Power (Watts): 1000 Watts (1800 Watts Peak)
• Max SPL (dB): 133dB Peak (127dB Continuous)
• Frequency Response (Hz +/- 3dB): 50 - 16k
• Crossover Frequency (Hz): 2100
• Driver Configuration: 15-inch, 2-inch
• HF Driver(s): 3-inch Titanium Voicecoil (2-inch exit)
• HF Dispersion ( DEG H x DEG V): 60x40
• HF Protection: Thermal / Peak Limiter
• LF Driver(s): 15-inch ceramic magnet w/4-inch voicecoil
• LF Protection: Thermal / Peak Limiter
• HF Amplifier Type: Class H
• LF Power Amplifier (Watts): 650
• LF Amplifier Type: Class D
• Power Cable: Yes
• Power Switch: Yes
• Inputs - 1/4 IN Jacks: 2 line inputs, 2 link (in/out)
• Inputs - XLR: 1 mic, 2 link (in/out)
• Input Impedance (Bal/UnBal): 95KOhms / 90kOhms
• Input Sensitivity (Vrms Sine): +4dBv / 1.23V (+/-6dB with trim control)
• Mixer Controls:
- +/- 6dB Trim control
- Mic Input w/level
- 2x 1/4" Line Input w/level
- Treble/Bass Tweak
- 100Hz HP Filter (LF Rolloff)
• Corners: Black Metal
• Feet: Plastic Glides
• Included Hardware: 3/8 inch x 9 (All Corners)
• Bar Handles: 2 Side
• Pole Mount Adapter (1 3/8 IN -3.5cm): 1 Bottom
• Enclosure Materials: 15mm Baltic Birch Plywood
• Grille: Heavy gauge perforated metal
• Covering / Finish: Black Ozite (Carpet)
• Optional Covering / Finishes: Black Ultrathane Paint (EF500PB) 18mm Birch
• Dimensions (DWH xbackW COM inches): 14.5 x 18.6 x 28.2 x 11.1
• Dimensions (DWH xbackW COM cm): 71.6 x 36.8 x 47.2 x 28.1
• Weight (lbs/kg): 82.9 / 37.6

Amazing speakers0 of 0 customers found this review helpful

FeaturesProduct ratingProduct ratingProduct ratingProduct ratingProduct rating
QualityProduct ratingProduct ratingProduct ratingProduct ratingProduct rating
ValueProduct ratingProduct ratingProduct ratingProduct ratingProduct rating
OverallProduct ratingProduct ratingProduct ratingProduct ratingProduct rating
Product ExperienceI own it
Closest StoreNorth Vancouver, British Columbia
Incredible power, quality, with no distortion at all! Had my set for many years of reliable use. Highly recommended.
Posted by B. Stevens on Oct 25, 2012
Was this review helpful?    flag review

Protect your investment with the Long & McQuade Performance Warranty.

Warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?

Performance Guarantee - normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage.

Product Replacement - if your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.

No Lemon Policy - your product will be replaced should the same problem occur multiple times.

Convenient - easy drop off and pick up of the product at any Long & McQuade location.

Guitar Setup - Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.

Loaners Available - a loaner product may be given while the product is being repaired.

Power Surge Protection - your product is covered even if damaged from a power surge.

Accessory Coverage - any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.

Commercial Use Coverage - music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty.Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, woodwind pads, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Accidental or cosmetic damage is not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

-----

Purchasing additional years of coverage

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

NEW products: 4% of selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

USED products: 4% of selling price to increase the warranty from 3 months to 1 year. 4% for each additional year. Pricing for used electronic products is 4% of the original new selling price.

GUITARS: 4% of selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.

BAND and ORCHESTRAL instruments: $40 up to $2,000 selling price. BRASS and STRINGS: 2% of the selling price after $2,000. WOODWINDS: 4% of the selling price after $2,000.

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.