Gibson SG Special 60`s Tribute - Worn Ebony Finish - Chrome Hardware

It's more than just a coincidence that mahogany is one of the most prized woods for electric guitar design, and the Gibson USA SG Special '60s Tribute is a classic example of the use of this fine tonewood in an instrument that's both subtle and aggressive. The thin solid-mahogany body offers a considerable reduction on weight when compared to many other solidbody electrics, while presenting a warm, rich resonance with lots of harmonic depth and sparkle.
The guitar's solid mahogany neck is carved to a fast SlimTaper profile similar to SGs from the '60s, for superb in-the-hand comfort and outstanding playability, while it's glued in deep-set, long-tenon neck/body joint and 17-degree back angled headstock team up to provide a transference of neck resonance into the body that's far superior to other neck designs.
Two Gibson P-90 single-coil pickups with genuine Alnico V magnetssome of the finest reproductions of vintage P-90s currently availableyield everything from warm, vocal neck tones to plenty of bark and snarl from the bridge position, with round and funky tones in between, all at the flip of a three-way toggle switch. To enhance all this tonal splendor, a stopbar tailpiece provides a rock-solid anchor behind Gibson's legendary Tune-o-matic tailpiece, prized for its ability to enhance singing sustain while remaining highly adjustable to perfect your instrument's intonation.
At the other end of the neck, a PLEK-cut Corian nut ensures superior resonance and sustain. Wrap it all in a thin nitrocellulose finish in Worn Cherry, Worn Natural, Worn White or Worn Ebony, with the smaller early '60s pickguard and pearloid dot fingerboard inlays, and it's a guitar that looks as raw and meaty as it sounds.
Features
- Solid Mahogany body with North American Rosewood fingerboard
- Available in four classic worn Finishes
- Slim, fast '60s style neck profile
- Two Gibson USA P-90 Pickups
- Vintage Kluson-Style tuners with perloid buttons
Body
Species: Mahogany
Adhesive: Franklin Titebond 50
Neck
Species: Mahogany
Profile: 60's SlimTaper
Truss Rod: Traditional Adjustable
Joint Angle: 5 (+/- 15 seconds)
Adhesive: Franklin Titebond 50
Neck Fit
Joint: Mortise & Tenon
Adhesive: Franklin Titebond 50
Joint Angle Tolerance: +/- .005"
Fingerboard
Species: North American Rosewood
Frets: 22
Radius: 12"
Nut/E.O.B: 1.695"/2.260"
Inlays: Acrylic Dots
Nut
Material: Corian
Width: 1.695
Slots: Gibson PLEK System
Headstock
Logo: Gold "Gibson" Logo
Truss Rod Cover: Black and White Antique Bell
Tuners
Model: Vintage Kluson Style with Perloid Buttons
Plating: Nickel
Tuning Ratio: 14:1
Bridge
Type: Tune-O-Matic
Material: Zamak
Plating: Chrome
Tailpiece
Type: Stop Bar
Material: Zamak
Plating: Chrome
Hardware
Knobs: Black Top Hat
Pickguard: Solid Black '61 Style
Toggle Switch Washer: Cream with Gold Silkscreen
Control Plate Cover: Black Acrylic
Strings: .010 - .046, Genuine Gibson strings
Strap Buttons: Aluminum
Pickups
Neck Position: P-90
Bridge Position: P-90
Electronics
Potentiometers:
- 2 Volume Controls
- 2 Tone Controls
Type: 300k Linear Volume, 500k Non-linear Tone
Coil Wiring: Machine Wound
Toggle Switch: Three-way Switchcraft with Black Plastic Tip
Output Jack: Traditional 1/4"
Available Finishes
Sealer: Nitrocellulose
Process: 1-1.5 mils
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.