ASI Audio
3DME Active Ambient Binaural In-Ear Monitor System
Additional Photos:
Controllable and fully tunable with an intuitive smartphone app, 3DME brings the same enhanced spatial sound quality enjoyed by touring artists around the world.
Enhances sound
Embedded binaural mics capture full frequency and dynamic natural ambience with accurate 3D directionality. Full-range drivers give reference-quality sound without crossover distortion.
Enhances hearing health
Rapid sound limiting keeps your 3DMEs at healthy sound levels and three sizes of zero-fatigue eartips ensure a tight seal to reduce harmful stage loudness.
Enhances control
The ASI Audio app lets you create custom settings for each ear, with EQ and the levels of room ambience for an individualized monitor mix. Fine tune your mix during rehearsal or soundcheck, then go play!
Features
• Active Ambient technology provides controlled 3D ambience with full earphone isolation
• Embedded binaural microphones capture full frequency range, full dynamic range natural ambience with accurate 3D directionality
• Full-range drivers provide reference-quality sound without crossover distortions
• Compact bodypack processing unit combines a monitor mix with the ambient sound
• Patented active signal processing enables distortion-free ambience capture up to 135 dB-SPL
• Monitor Out jack provides for monitoring of the complete reproduced sound, including by the dBCheck
• Intuitive smartphone app sets multiple stored body pack processing options
• Selectable ambience level, with left, right adjusted together or separately
• Selectable limiting of maximum average reproduced levels, with left, right adjusted together or separately, and with the limiting action linked between channels or independent
• Multiband frequency equalization of the reproduced sound, with left, right adjusted together or separately
• Body pack provides ambient level up/down buttons, programmed either for step-wise action or pre-selected levels, for quick in-use adjustment of ambience level
• Body pack incorporates rapid limiting of clipping-level signals sensed at multiple circuit points
• Body pack has rechargeable Li-Ion battery and bluetooth interface
• Body pack provides LED indication of battery state-of-charge, charging status, and USB power
System Includes:
- 3DME In-Ear Monitors
- 3DME Bodypack Mixer/Amplifier
- ASI Audio App
- Accessories: 3 sizes of zero-fatigue eartips (S,M,L), stereo jumper cable, USB bodypack charging cable,
wall charger, carrying case, earpiece cleaning tool, shirt clip
Specs
- Frequency Response: 20 Hz - 20 kHz
- Microphone Input Overload: 135 dB-SPL
- Maximum Output, 500 Hz: 122 dB-SPL
- Microphone Equivalent Input Noise: 27 dBA-SPL
- Monitor Equivalent Input Noise: -104 dBV(A) (EQ disengaged); -101 dBV(A) (EQ engaged)
- Output Noise: 20 dBA-SPL (EQ disengaged); 23 dBA-SPL (EQ engaged)
- Acoustic Insertion gain: Off, -24 dB to +12 dB in 16 steps
- Monitor Sensitivity, 500 Hz: 102 dB-SPL for -20 dBV (100 mVrms) input
- Monitor Input Impedance: 10 kOhm
- Limiter Type: Adaptive attack, average responding, frequency selective
- Limiter Threshold: 84 dBA to 105 dBA in 8 steps and Off
- Maximum Limiter Gain Reduction: 20 dB
- Multiband EQ: +/-12 dB at 60, 140, 330, 770, 1800, 4300, 10000 Hz
- Latency: 0 (EQ disengaged), 350 usec (EQ engaged)
- Operating Time (from full charge): > 7 hours
- Charge Time (fully depleted battery): ~ 4 hours
Bodypack Dimensions: 64 x 54 x 25.5mm / 2.12 x 2.5 x 1.004 inches
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| 3DME Active Ambient Binaural In-Ear Monitor System | 761965 |
