Ashdown Engineering

CTM-30 Little Stubby

SKU: # 761518   |   Model: # CTM-30   |    Product Reviews0 Reviews  Write a Review

CTM-30 Little Stubby

Additional Photos:

CTM-30 Little Stubby
CTM-30 Little Stubby
CTM-30 Little Stubby
Your Price: $1,699.00 CDN
or from $141 CDN/mo

Buy Online

 Add to Cart

Buy In-Store

30 watt all valve mini bass head, 4 X EL84, ECC81, ECC82, ECC 83. Passive EQ, FX Loop, DI

All valve (tube) bass amps are truly special, known for their warmth, punch and harmonic richness that solid state amplifiers can rarely achieve. The trade off is that traditionally valve amps are big, heavy and cumbersome.

The CTM-30 Little Stubby pushes the rules of valve amplification design to the limits in a never before seen highly compact package that breaks away from the traditionally unwieldy amplifiers of years gone by. Producing 30 watts of inspirational all valve bass tone from 4 x EL84 output valves the Little Stubby is all about purity of tone combined with real world versatility. The input gain and master volume allow for deep clean tones through to hugely overdriven contemporary tones and all points in between.

The unique Feedback control allows the complete character of the amp to be changed and fine-tuned from old school vintage valve amp tones at one end through to tighter more mid-heavy modern tones at the other. This combined with the well-considered three band EQ gives almost limitless tonal variations. FX send and return continue the sonic purity and allow the players favourite modulation/time-based effects to be sent straight into the power amp.

The Ashdown CTM-30 Little Stubby has an upgraded 30-watt EL84 driven power section and features a single instrument input with hi and low input sensitivity selector switch, for use with active or passive basses. The amp combines traditional 'Bass, Middle and Treble' rotary EQ control with a familiar Volume, Drive and unique Feedback control to accomplish both contemporary and classic all-valve tones from its ECC81, ECC82 and ECC83 preamp valves. It's extremely easy to find the gain 'sweet spot' on the Little Stubby - producing a warm, full-bodied overdriven sound.

The Little Stubby features a balanced transformer derived DI output. Perfect for studio recording or for live performances where you need to get pure DI signal to the desk with a minimum hassle. If you want to use your favourite pedals or multi-effects, you'll find conveniently located send and return sockets on the front panel.

A duo of 1/4" Jack sockets provides flexible partnering options with a range of Ashdown speaker cabinets at 4-ohm (minimum) or 8-ohm.

Improved tone, features, portability and versatility make the Little Stubby a new icon in the all valve bass amplification market.

Specifications
Power Output: 30 Watts
Power Requirement: 115-240 Volts
Speaker Outputs: 3 x Jack 8/4/2 Ohm
DI Output: Transformer isolated and derived DI
Impedance: Minimum Impedance 2 Ohm
EQ: Passive EQ Section. Bass, Middle and Treble plus push shape
Effects Send: Jack
Effects Return: Jack
Pre-Amp Tubes: 1 x ECC81, 1 X ECC82, 2 x ECC83 preamp valves
Output Tubes: 4 x JJ EL-84

Dimensions (H x W x D): 95 x 400 x 235mm
Weight: 9.1 kg

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.