Traynor 300 Watt Stereo Keyboard Amp / Monitor Combo

Background:
In the 1970s, Yorkville Sound was the first company we know of to design and build dedicated keyboard amplification. That was their ground-breaking "RVS" line. Since then their introduction of the Traynor Bloc-100K in the early 1980s, Stage 100K in the later 80s and a succession of influential models since then has established Yorkville as a premier innovator in this field. The Traynor K series makes this amply clear.

K4 Details:
The Canadian-built Traynor K4 is an advanced, extremely versatile stereo keyboard amplifier capable of delivering a wide and varied tone pallet at high stage volume levels. Flagship of the Traynor K series, the K4 uses three separate integrated amplifiers to deliver true stereo separation of the mid and high frequencies with the added bottom end of a separate 200-Watt low-frequency amplifier driving a 12-inch woofer.

A pair of 50 watt amplifiers powers 4.5-inch midrange and 2.5-inch high-frequency drivers mounted in stereo pairs on an angled front baffle. This variation of the 2.1 speaker configuration allows a stereo image to be amply felt onstage.

One of the most versatile amplifiers of its kind, the K4 offers four channels and a switch-selectable choice of tube or solid-state input stages. The tube circuit uses a pair of 12AX7As for adding warmth and smoothness to the often-sterile sound of modern digital keyboards. Thanks to Lead Level and OD Trim controls, you can create natural tube compression and recreate the subtle dynamics that can't be properly emulated by most of today's digital workstations. For greater effect, this preset can be footswitched in and out.

The crisp, clean solid-state input stage is ideal for those times when precise definition of acoustic samples or instruments is required.

Versatile inputs allow two stereo sources to be connected to Channel One, while an additional stereo source or a microphone can be connected to Channel Two. Channel Three can handle an additional stereo keyboard or any other source including MP3 player or laptop where additional EQ control isn't required. Channels One and Two have separate 3-band EQ's for tone shaping, while Channel One offers an additional 5-position Voicing circuit with four presets - Studio, Live, Piano & Organ - plus an Off setting.

An indepenant fourth stereo input channel with its own Gain control can be found on the rear panel of the K4. It directly feeds the power amp section, bypassing the Line Out and Master volume. This versatile feature allows an external click track, drum monitor mix or monitor feed from the PA or recording console to be played through the K4 as if it were a monitor and without being in the audience or recorded mix.

Built for the rigors of the road, the Traynor K4 is manufactured using a solid, void-free plywood cabinet construction and an all-metal grille to protect the high quality speaker components.

Features:
- True Stereo Configuration in a combo amplifier format
- 300 watts (200 watts low frequency, 2 x 50 watts mid / high frequencies)
- 4 sets of front panel stereo inputs (three channels)
- L&R 1/4" TRS Line Inputs to independent channel 4
- L&R XLR Line Outputs
- Upright or angle-monitor cabinet design
- Solid Plywood Cabinet Construction
- All metal grille & metal bar handles
- Transferable 2-year warranty throughout Canada and the USA also covers cabinet integrity defects.

Specifications:
• Type - Keyboard Amplifier/Monitor
• Total Applied Power (Cont.Watts) - 300
• Low-Frequency Applied Power (Cont.Watts) - 200
• Mid/High-Frequency Applied Power (Cont.Watts) - 50 x 2
• Woofer - 12-inch, 200 Watts
• Mid Drivers 2 x 4.5-inch, 50 Watts
• Tweeters - 2 x 2.5-inch, 50 Watts
• Overall Amplifier Frequency Response - 20-20kHz +/-3dB
• Inputs - 4
• Channel 1 Inputs - 2 Stereo pairs of 1/4-inch TRS
• Channel 1 Controls - Gain, 3 band EQ, 5 position Voicing, Lead/OD Trim
• Channel 1 Switches - Lead/Overdrive, Tube/Solid State
• Channel 2 Inputs - XLR mic, L & R 1/4-inch TRS
• Channel 2 Controls - Gain, 3 band EQ
• Channel 3 Inputs - L&R 1/4-inch TRS jacks, L&R RCAs
• Channel 3 Controls - Gain
• Channel 4 Inputs - L&R 1/4-inch TRS
• Channel 4 Controls - Gain
• Master Volume - regulates chan.1,2&3 amp and Line levels
• Input Sensitivity (mV)- Ch.1/2 - 500mV / Ch. 3 - 250mV
• Line Out - Stereo XLR (Post EQ, Pre Master), Ground Lift
• Subwoofer Out - 1/4-inch unbalanced, full-range
• Line Out/ Subwoofer Out Level - 1Vrms
• LED Indicators - Power, Clip Lead/OD
• Protection - Thermal
• Headphone Jack - Stereo 1/4-inch TRS
• Dimensions (DWH, inches) - 15.5 / 23.3 / 19.6
• Dimensions (DWH, cm) - 39.4 / 59 / 50
• Weight (lbs / kg) - 57.3 / 26