Avantone Pro
CLA-10A Limited Edition Wood Grain Active Studio Monitors (Pair)
Additional Photos:
Avantone Pro, in conjunction with the legendary mixer Chris Lord-Alge, designed the most faithful reproduction of the world's most iconic studio monitor in the CLA-10 and CLA 10A, and ever since the world has been able to mix on the monitors that defined "the sound of hits." A tremendous amount of design work and exacting detail made the "white cone" monitors available to everyone!
So, how do you improve on perfection without altering the classic sound one expects from the "white cone?" By changing the finish, of course!
The CLA-10A Limited Edition delivers the classic white cone reference tone in a stunning North American black walnut veneer that has a look as classic as its sound. And unlike yesteryear's studio reference classic, the CLA-10A Limited Edition is an active loudspeaker; no independent power amp required.
The Original Drivers for the Original Sound
Since the "white cone" studio monitor was discontinued, the supply of aftermarket components have become more and more expensive and less and less available. Avantone Pro has created a near exact recreation of the original drivers. Using their global resources and decade of experience in driver construction, they have reproduced the components faithfully, updating the materials to comply with modern environmental requirements.
The AV10-MHF tweeter dome went through a difficult engineering process to get the exact phenolic resin doping to match the original performance curve. The AV10-MLF woofer uses cus-tom-tooled mechanical parts that mirror the original. Avantone Pro worked closely with one of the original vendors of the original cone to get the exact same stiffness and weight, but upgraded the production process to create machine-pressed cones. Because of this, the CLA-10 marks the first time that a white cone-style speaker has been made available in sonically matched pairs!
Versatile Voicing and Old-school Power
One of the most common questions asked about the CLA 10As is which version of the originals are they based on, and the answer is: all of them! The CLA-10As have a "VTPC" knob (Variable Tissue Paper Control) allowing you to simulate the high-frequency dampening trick used on the original speakers-covering the tweeters with tissue paper. This VTPC allows you to simulate anything from the Vertical "m" model to the horizontal "Studio" model and everything in between. No more debate over the best tissue paper to use - VTPC has you covered - and you'll save money on tissue paper in the long run.
Avantone Pro decided to stay traditional with a linear power supply implementing a massive, old-school toroidal transformer in order to maintain the legacy sound. The CLA 10A uses a monolithic Class AB amplifier. At low power, THD is a phenomenal 0.005%; at rated load it is 0.1%, yielding excellent performance compared to class D amps. The system yields a rock solid 200W RMS.
Specifications
System Type: 240W total RMS full-range 2-way stereo pair / 120W per speakerFrequency Response: 60Hz-20,000Hz (Accessible musical range)
Cabinet: Sealed cabinet design, hybrid medium-density fiberboard with real wood veneer
LF Driver: AV10-MLF 18 cm cone
HF Driver: AV10-MHF 3.5 cm soft dome
Dimensions: 381.5 x 215 x 197.5 mm (15 x 8-1/2 x 7-3/4")
Weight: 8 kg (17.6 lbs) (each)
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| CLA-10A Limited Edition Wood Grain Active Studio Monitors (Pair) | 798706 |
