Walrus Audio
Meraki Analog Stereo Delay
Additional Photos:
The Meraki stereo analog delay uses eight MN3005 bucket brigade chips to create warm, rich repeats. Capable of 1200ms of delay time with parallel, ping-pong and series delay modes. Independently control the delay times and modulation of the left and right channels to create syncopated repeats or keep them locked into the same timing for classic repeat sounds.
Versatile Delay Modes
Explore parallel, ping-pong, and series delay lines to craft your unique sound. Create syncopated rhythms orclassic repeats with independent controlover the left and right channels.
Precise Controls
- Mix Dial in the perfect blend of wet and dry signals with the Mix control, offering full wet/dry mix capability.
- Feedback Left/Right Fine-tune the amount of repeats in each channel, from subtle echoesto full oscillation.
- Mod Depth/Rate Add depth to your repeats with adjustable modulation, creating a chorus/vibrato effect in the repeats. Secondary functions allow wave shape and modulation phase adjustments as well.
- Time Tailor your delay time from80ms to 1200ms, offering a wide range of sonic possibilities.
- Tone Shape the tone of your delay repeats with the Tilt EQ, cutting lows and boosting highs or vice versa.
MIDI Implementation
Digitally manipulate controls like time, modulation, tap tempo, tap division, and more with five-pin MIDI integration.
Tap into Creativity
- Tap Division Left/Right Switch Choose between quarter note, dotted eighth, and eighth note repeats for each channel.
- Feedback Mode Switch Select between Parallel, Ping-Pong, and Series delay lines for diverse rhythmic textures.
- Sync/Left/Right Switch Fine-tune settings independently for each side, unlocking a world of mismatched timings and creative possibilities with fully independent time, divisions, and mod depth/rate/shapes.
Bypass Options
Choose between True-Bypass or Buffered Bypass for trails, and toggle between Trails (default) or Relay (no-trails) with the Bypass switch.
Tap Tempo and Expression Control
Take command of your timing with the Tap Tempo switch, or use external tap or an expression pedal for even more dynamic control over time or modulation depth.
Ready for takeoff
Hold the Tap switch to ramp up repeats and send the pedal into self-oscillation. Fun tip: Get extra creative with sound exploration with MIDI control over oscillation and tap division manipulation.
Features
• True stereo in/out analog delay• Uses eight MN3005 bucket brigade chips for independent delays and up to 1200ms of delay time
• Parallel, Ping-Pong, and Series delay modes
• Independently control left and right channel delay times, tap division, modulation and more
• MIDI implementation to control time, modulation, tap tempo, tap division and more
• External tap or expression to control time or modulation depth
• Modulation depth, speed and phase control
• Momentary oscillation ramp up when holdingtap switch
• 9VDC, center negative, 500mA minimum
• Designed and assembled in the USA
Specifications
Frequency Response: 60Hz To 20kHzNoise Floor:-94dBu (Dry),-86dBu (Wet)
Input Impedance: 1M Ohms
Output Impedance: 100 Ohms
Power Requirement: 9VDC, 500mA
Bypass options: True bypass (notrails) and Buffered bypass (trails)
Size Including Stomp/Jacks
Height: 2.35" (59.69 mm)
Width: 4.98" (126.49 mm)
Depth: 5.86" (148.84 mm)
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Meraki Analog Stereo Delay | 799027 |
