Opens in a new window
Mesa Boogie
CabClone IR+ 8-Cabinet Simulator with Attenuator - 4 Ohm
Product Videos :
YouTube Video
3 models to choose from:
8 Legendary MESA Cabs, Meticulously Captured Two Ways
The CabClone IR PLUS comes with 16 MESA Proprietary Cabinet Impulse Responses loaded into two banks of 8 Presets. BANK A contains our 'LIVE' IRs, recorded with Dynamic and Ribbon Microphones. BANK B contains our 'STUDIO' IRs recorded with Condenser and Ribbon microphones for the same eight most popular MESA cabinets, appearing in the same order. This allows you to compare the microphone choices by simply flipping the BANK switch between A and B. The 'Factory' loaded cabinet models, BANK A-LIVE and BANK B-STUDIO, are loaded left to right in these 8 Preset Locations:
• 4x12 RECTO STANDARD with Celestion V30s - 8 Ohm
• 4X12 RECTO TRADITIONAL with Celestion V30s - 8Ohm
• 2X12 RECTO HORIZONTAL with Celestion V30s - 16 Ohm
• 1X12 RECTO 1X12 with Celestion C90 - 8 Ohm
• 1X12 THIELE with Celestion C90 - 8 Ohm
• 2X12 LONE STAR with Celestion C90 - 16 Ohm
• 1X12 LONE STAR 23 with Celestion C90 - 8 Ohm
• 1X12 CALIFORNIA TWEED 23 with Jensen Alnico "Blackbird" - 8 Ohm
Powerful DI + Perfect Power and On-Board Attenuation
The CabCLone IR PLUS includes a built-in attenuator so you can use your favorite, or venue-appropriate, power window to achieve the perfect sound and feel to mate with your Cab Simulation of choice. A great sounding Power Attenuator added to this already comprehensive bag of tricks puts it over the top in terms of flexibility and convenience, in its class and beyond. Four power reduction settings and 0dB/Bypass offer the entire range of clamp-ability for your tube amp with the lowest setting, -16dB, including a rheostat (pot) for infinite control over volume on the way down to silent/off. The PLUS version also includes a Warning LED to alert you when a No-Load scenario is detected at the SPKR output and SPKR has accidentally been selected on the SPKR/LOAD switch and signal is present
MIDI Control
MIDI (Program Change) messages are supported and can be used to access the 16 Cabinet Simulations/IRs housed in the two BANKS of 8 Presets via the standard 5-pin MIDI IN connector. A MIDI THRU is provided to pass those program change messages on to other devices in your rig that accommodate midi commands.
This means you can dedicate different Cabinets for each of your preamp/amp sounds. You might choose an Open-Back 2x12 from the LIVE BANK for your Clean sound/Channel, a Closed-Back 4x12 from the LIVE BANK for your Crunch Rhythm sound and a Closed-Back 1x12 from the STUDIO BANK for your Solo sound/Channel. You may want two different Cab Sims on the same sound/Channel for different applications or vibes. For a Bluesy sound in a pushed Clean Channel, you may want a 1x12 Open-Back Ceramic (magnet) speaker for your Rhythm work and a 1x12 Open-Back loaded with an Alnico speaker for your Lead sound. Midi compatibility expands the matchmaking possibilities many-fold and allows these style-appropriate pairings to be accessed instantly from one button on your midi controller.
Third-Party IR Compatibility
Along with the 16 MESA Factory supplied IR Cabinet Simulations, there is ample room to download and save a huge library of third-party IRs within the CabClone IR's processor memory. Once accessed and viewed on your computer as a standard file directory via USB connection, IR Cab Sims can be downloaded and dragged or copied (one for each of the 16 presets), into any of the CabClone's available locations within the two Banks of eight.
Features
• Open System, Third-Party IR Compatibility allows open access to download, store and use your favorite IRs of choice. USB 2.0 A to B connection cable (not included) is required for managing IR file directory.
• Extra 'Cabinet Library' Space for storing additional IR favorites, beyond the 16 factory-loaded Presets, for native access via any USB computer connection
• MIDI IN & THRU provides class-leading control and instant access to switch IRs on the fly to best match your amps voicings
• Two 1/4" Input Jacks (From Amp Speaker Output & Line/Instrument In)
• One 1/4" 'TO SPKR' Live Speaker Cabinet Output Jack (defeats Internal Reactive Load when cable is connected)
• Variable Input Level Control with 3-Bar LED Input Signal Meter
• Variable Output Level Control
• IR Balanced XLR Direct Output (Controlled by the Variable Output Level Control)
• Independent 1/4" +4 Line Level "Dry" Output Jack (Exact signal from amp's speaker output, no IR applied and controlled by the Variable Input Level Control)
• Headphone Output Jack (Controlled by the Variable Output Level Control)
• Phase Switch; Normal (Phase) or Reverse (180⁰)
• Ground Lift Switch
• 18 VDC Power Supply
• Tall Rubber Feet - Allows CabClone IR to sit on top of most amps, clearing the handle
• Dimensions: 7.5" x 6.6" x 4.5" / 19.05cm x 16.8cm x 11.4cm
• Weight: 4 lb / 1.8 kg
The CabClone IR PLUS comes with 16 MESA Proprietary Cabinet Impulse Responses loaded into two banks of 8 Presets. BANK A contains our 'LIVE' IRs, recorded with Dynamic and Ribbon Microphones. BANK B contains our 'STUDIO' IRs recorded with Condenser and Ribbon microphones for the same eight most popular MESA cabinets, appearing in the same order. This allows you to compare the microphone choices by simply flipping the BANK switch between A and B. The 'Factory' loaded cabinet models, BANK A-LIVE and BANK B-STUDIO, are loaded left to right in these 8 Preset Locations:
• 4x12 RECTO STANDARD with Celestion V30s - 8 Ohm
• 4X12 RECTO TRADITIONAL with Celestion V30s - 8Ohm
• 2X12 RECTO HORIZONTAL with Celestion V30s - 16 Ohm
• 1X12 RECTO 1X12 with Celestion C90 - 8 Ohm
• 1X12 THIELE with Celestion C90 - 8 Ohm
• 2X12 LONE STAR with Celestion C90 - 16 Ohm
• 1X12 LONE STAR 23 with Celestion C90 - 8 Ohm
• 1X12 CALIFORNIA TWEED 23 with Jensen Alnico "Blackbird" - 8 Ohm
Powerful DI + Perfect Power and On-Board Attenuation
The CabCLone IR PLUS includes a built-in attenuator so you can use your favorite, or venue-appropriate, power window to achieve the perfect sound and feel to mate with your Cab Simulation of choice. A great sounding Power Attenuator added to this already comprehensive bag of tricks puts it over the top in terms of flexibility and convenience, in its class and beyond. Four power reduction settings and 0dB/Bypass offer the entire range of clamp-ability for your tube amp with the lowest setting, -16dB, including a rheostat (pot) for infinite control over volume on the way down to silent/off. The PLUS version also includes a Warning LED to alert you when a No-Load scenario is detected at the SPKR output and SPKR has accidentally been selected on the SPKR/LOAD switch and signal is present
MIDI Control
MIDI (Program Change) messages are supported and can be used to access the 16 Cabinet Simulations/IRs housed in the two BANKS of 8 Presets via the standard 5-pin MIDI IN connector. A MIDI THRU is provided to pass those program change messages on to other devices in your rig that accommodate midi commands.
This means you can dedicate different Cabinets for each of your preamp/amp sounds. You might choose an Open-Back 2x12 from the LIVE BANK for your Clean sound/Channel, a Closed-Back 4x12 from the LIVE BANK for your Crunch Rhythm sound and a Closed-Back 1x12 from the STUDIO BANK for your Solo sound/Channel. You may want two different Cab Sims on the same sound/Channel for different applications or vibes. For a Bluesy sound in a pushed Clean Channel, you may want a 1x12 Open-Back Ceramic (magnet) speaker for your Rhythm work and a 1x12 Open-Back loaded with an Alnico speaker for your Lead sound. Midi compatibility expands the matchmaking possibilities many-fold and allows these style-appropriate pairings to be accessed instantly from one button on your midi controller.
Third-Party IR Compatibility
Along with the 16 MESA Factory supplied IR Cabinet Simulations, there is ample room to download and save a huge library of third-party IRs within the CabClone IR's processor memory. Once accessed and viewed on your computer as a standard file directory via USB connection, IR Cab Sims can be downloaded and dragged or copied (one for each of the 16 presets), into any of the CabClone's available locations within the two Banks of eight.
Features
• Open System, Third-Party IR Compatibility allows open access to download, store and use your favorite IRs of choice. USB 2.0 A to B connection cable (not included) is required for managing IR file directory.
• Extra 'Cabinet Library' Space for storing additional IR favorites, beyond the 16 factory-loaded Presets, for native access via any USB computer connection
• MIDI IN & THRU provides class-leading control and instant access to switch IRs on the fly to best match your amps voicings
• Two 1/4" Input Jacks (From Amp Speaker Output & Line/Instrument In)
• One 1/4" 'TO SPKR' Live Speaker Cabinet Output Jack (defeats Internal Reactive Load when cable is connected)
• Variable Input Level Control with 3-Bar LED Input Signal Meter
• Variable Output Level Control
• IR Balanced XLR Direct Output (Controlled by the Variable Output Level Control)
• Independent 1/4" +4 Line Level "Dry" Output Jack (Exact signal from amp's speaker output, no IR applied and controlled by the Variable Input Level Control)
• Headphone Output Jack (Controlled by the Variable Output Level Control)
• Phase Switch; Normal (Phase) or Reverse (180⁰)
• Ground Lift Switch
• 18 VDC Power Supply
• Tall Rubber Feet - Allows CabClone IR to sit on top of most amps, clearing the handle
• Dimensions: 7.5" x 6.6" x 4.5" / 19.05cm x 16.8cm x 11.4cm
• Weight: 4 lb / 1.8 kg
Media
Youtube video product demo
Q & A
There are currently no questions for this product.
Reviews
3.17.28.48
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
They got it right 1 of 2 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Toronto (Bloor St.), Ontario
There’s no substitute for your favorite tube amplifier paired with your favorite cab in a magical sounding room. We know the challenges and costs of capturing great tone and recreating that tone from venue to venue for those recording or in a live stage environment. Sometimes we just need the convenience of going direct for recording.
The CabClone IR PLUS Cabinet Simulator/IR Reader is ready to give you options, portability, control and tonal consistency from venue to venue. Go direct to interface or console for recording or playing live, or straight to headphones for silent practice with the new CabClone IR PLUS.
The CabCLone IR PLUS includes a built-in attenuator so you can achieve the sound and feel to mate with your Cab Simulation of choice. Four power reduction settings and 0dB/Bypass offer the entire range of clamp-ability for your tube amp with the lowest setting, -16dB, including a pot for infinite control over volume on the way down to silent/off. The PLUS version includes a Warning LED to alert you when a No-Load scenario is detected at the SPKR output and SPKR has accidentally been selected on the SPKR/LOAD switch and signal is present.
Along with the 16 MESA Factory supplied IR Cabinet Simulations, there is ample room to download and save a huge library of third-party IRs within the CabClone IR’s processor memory. Once accessed and viewed on your computer as a standard file directory via USB connection, IR Cab Sims can be downloaded and copied (one for each of the 16 presets), into any of the CabClone’s available locations within the two Banks of eight.
Posted by Retired Schmuck on Mar 28, 2021
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| CabClone IR+ 8-Cabinet Simulator with Attenuator - 4 Ohm | 723620 |
