Behringer Classic Analog Octave Divider and Ringer Effects Pedal
Additional Photos:
Musicians from the 1970s always had some sort of secret weapon in their setup. Something they'd turn on in the middle of a raging solo or an effect to create mind-blowing sounds that turned songs into instant classics. David Gilmour had the Phaser and Hendrix had the Octavia. One of those secret weapons you should definitely have on your pedalboard is the Behringer OCTAVE DIVIDER. Turn this baby on and create nice jazzy riffs with a tight bassline underneath or add that much needed top-end sizzle for your epic guitar solo. It can even be used to add a bit more funkiness to bass, keyboards and other instruments. We're looking at you electric triangle man!
Recreation Done Right
The OCTAVE DIVIDER is an authentic recreation of the popular Octave Divider from the '70s. It features an earth-shaking sub-octave effect with its own MIX and TONE controls so you can blend your dry and sub-octave signal, or shape that tone to your taste while still preserving the dynamics and harmonics. The BASS ONLY switch also allows you to completely cut out the dry signal leaving only the sub-octave so you can create your own complex basslines on the fly. The OCTAVE DIVIDER brings all the amazing features from the original '70s design, plus a few modern ones, that are sure to fit right at home with any pedal board.
Put Your Tone Through the Ringer
There's got to be more to it than just adding a sub-octave signal to whatever you're playing right? The OCTAVE DIVIDER has an amazing RINGER function that adds just the right amount of harmonic emphasis on the upper tones and special multi-note effects through activation of a built-in ring modulator. If you're into using the OCTAVE DIVIDER to thicken up more complex riffs or just want a nice and tight bass line to a legato, then flipping the Stabilize switch on can also help improve note tracking.
Power and Strength
The original Octave Divider had to be plugged in to a wall outlet. Behringer decided to make it much easier for you to integrate the OCTAVE DIVIDER into your modern-day setup by powering it with standard 9-12 volt DC power. You can also be gig-ready because the OCTAVE DIVIDER has a rugged and reliable metal construction, made to withstand the rigors of the road. and the heaviest of stomps.
Unlocked Potential
If you're looking for that perfect Octave pedal or just want something new to add to your sound, then the Behringer OCTAVE DIVIDER is the essential tool to unleash your creative beast.
Features
• Classic octave divider pedal for guitars, bass, keyboards, and other instruments• Authentic recreation of the popular Octave Divider from the '70s
• Earth-shaking sub-octave effect for powerful sound creation
• Amazing Ringer function for harmonic emphasis of upper tones and special multi-note effects
• Preserves dynamics and harmonic content of the original signal in the sub-octave
• Bass Only switch for extended range and dramatic effects
• Mix control for blending direct and sub-octave signal
• Tone control for ultimate sound shaping
• Stabilize switch locks into all single-voiced signals for improved note tracking
• Auxiliary output to send dry signal to other effects pedals or amplifier
• Power switch and LED to indicate operating status
• Rugged and reliable metal construction
• Power supply included
Specifications
Instrument Inputs- 1/4" TS jack, unbalanced
- Impedance: 200 kΩ
- Max input level: 1.4 dBu
Amp Outputs
- 1/4" TS jack, unbalanced
- Impedance: 5.6 kΩ
- Max output level: 4.5 dBu
Power
- Power supply: PSU-SB, 9 V DC, 0.67 A
- Power consumption: 300 mA
Physical
- Dimensions: 99 x 174 x 63 mm (3.9 x 6.9 x 2.5")
- Weight: 0.85 kg (1.87 lbs)
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Classic Analog Octave Divider and Ringer Effects Pedal | 803029 |
