Behringer 2600-VCO Legendary Analog VCO Module for Eurorack

Modular Synthesis
The original 2600 came out in the '70s and was a mainly all discrete transistor design with some op-amps. The discrete circuitry gave the 2600 a very distinctive sound and were used by artists like Jean Michel Jarre, Depeche Mode, Stevie Wonder and so many more. The 2600-VCO is a compact and versatile module, giving you a VCO featuring four simultaneous waveforms with the ability to control a wide frequency band for amazing flexibility. Modular synths were a landmark development in electronic music and today, it's about to get better.

2600-VCO
This is the Behringer 2600-VCO. An analog VCO module and an authentic reproduction of the original ARP 2600 circuitry that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 2600-VCO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

Mix It Up
The 2600-VCO is a feature rich module with four simultaneous waveforms: sine, triangle, saw and pulse which allow for an awe-inspiring palette of tonal possibilities. You can even control the oscillators frequency which ranges from 10 Hz to 10 kHz and from 0.03 Hz to 30 Hz when the 2600-VCO is switched to LF mode. The VCO can also be tuned to other instruments or VCOs with the Fine Tune knob. Adjust the pulse width range anywhere from 10% to 90% and youll be ready to rock whether you're in a band or integrating the 2600-VCO into your monstrous setup!

Ins and Outs
The 2600-VCO comes with an array of FM and CV inputs. Each FM input comes with their own attenuator to control the level of modulation. A separate PWM input can be used if you want to control or modulate the Pulse waveform. The 2600-VCO even accepts control voltages from a keyboard or MIDI/CV converter which you can turn on or off with the Keyboard On/Off switch, which also switches the VCO to low frequency mode.

Eurorack Ready
Installing the 2600-VCO is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows the 2600-VCO to be mixed with other synth modules for a truly unique set up.

Amazing Gear at an Affordable Price
Whether you're just getting into modular synths or looking to complete your collection, the 2600-VCO from Behringer is a great tool to have when creating amazing music.

Features

• Amazing sounding VCO module from the '70s
• Authentic reproduction of original ARP 2600 circuitry
• VCO features 4 simultaneous waveforms: sine, triangle, saw and pulse
• VCO offers wide frequency control from 10 Hz to 10 kHz or 0.03 Hz to 30 Hz in LF mode
• PWM can be simultaneously controlled manually and via external CV input
• Switchable between LF (keyboard off) and Audio (keyboard on)
• Separate outputs for each waveform and 5 CV inputs for pitch control and PWM
• 8 controls and switches give you real-time access to all important parameters
• Eurorack specs: 16 HP, 140 mA +12 V, 5 mA -12 V

Specifications

Inputs
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 100 kΩ, unbalanced
- CV range: 10 V, 1 V/oct.
- Type: 3 x 3.5 mm TS jacks, DC coupled
- Impedance: 50 kΩ, unbalanced
- CV range: 10 V, 1 V/octave
- Type: 1 x 3.5 mm TS jack, DC coupled
- Impedance: 75 kΩ, unbalanced
- CV range: 10 V, typically 1 V/10%

Outputs
- Type: 4 x 3.5 mm TS jacks, DC coupled
- Impedance: 1 kΩ, unbalanced
- TRI level: +5 V
- SINE level: +5 V
- SAW level: 0 V / +10 V
- PULSE level: 0 V / +10 V

Controls
- Initial oscillator frequency fader: Sets oscillator frequency (10 oct. range)
- Fine tune knob: Oscillator fine tune adjustment (+0.4 oct.)
- Audio (Kybd on) / LF (Kybd off) slide switch: Select audio band (10 Hz to 10 kHz) or LFO (0.03 Hz to 30 Hz)
- FM 1 / 2 /3 faders: Attenuate FM inputs (-∞ to unity gain)
- Pulse width fader: Pulse width adjustment (10% to 90%)
- PWM fader: Pulse width modulation attenuator (-∞ to unity gain)

Power
- Power supply: Eurorack
- Current draw: 140 mA (+12 V), 5 mA (-12 V)

Physical
- Dimensions (H x W x D): 129 x 81 x 42 mm (5.08 x 3.19 x 1.65")
- Rack units: 16 HP
- Weight: 0.15 kg (0.33 lbs)