Behringer Four Play Quad VCA and Mixer Module

The first synth modules came out in the 60s and tended to be extremely expensive. The FOUR PLAY is a modern compact and versatile module giving you four independent VCA's which can also be used as a 4-channel voltage-controlled mixer for amazing flexibility. Modular synths were a landmark development in electronic music and today, it's about to get better.

This is the Behringer FOUR PLAY. A high performance quad VCA and mixer module that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the FOUR PLAY in with your existing rig or start your modular synth journey from here. Either way youre sure to have a lot of fun.

The FOUR PLAY is a feature rich quad VCA module with CV input attenuators, each with a bi-color LED to indicate CV input activity and polarity. Input boost switches add extra gain for lower level input signals. The curve controls allow you to setup the ideal CV response curve from fully exponential to linear, or any combination of the two. The level controls set the VCA gain and allow manual control of the signal output level, both when used as independent VCA's or when used as a mixer. The VCA's are DC coupled so can process both audio signals and CV signals.

Whether you're just getting into modular synths or looking to complete your collection, the FOUR PLAY from Behringer is a great tool to have when creating amazing music.

Specifications

Inputs
CV in
Type: 4 x 3.5 mm TS jacks, DC coupled
Impedance: 1 MΩ, unbalanced, half normalled
Max input level: 10 V p-p
In
Type: 4 x 3.5 mm TS jack, DC coupled
Impedance: 30 kΩ, 15 kΩ with boost enabled, unbalanced
Max input level: +19 dBu

Output
Type: 4 x 3.5 mm TS jack, DC coupled
Impedance: 100 Ω, unbalanced, half normalled
Max output level: +19 dBu
Output noise at unity gain: -92 dBu, 22 Hz-22 kHz
Output noise at full attenuation: -98 dBu, 22 Hz-22 kHz
Maximum attenuation: -97 dB at 1 kHz

Controls CV attenuator: -∞ to unity gain
Exp/Lin: Exponential to linear CV response
Level: -∞ to unity gain
Boost switch: Adds +6 dB input gain
CV LED: Green =positive CV, Red =negative CV

Power
Power supply: Eurorack
Current draw: 100 mA (+12 V), 100 mA (-12 V)