Opens in a new window
Clearsonic
IsoPac A Isolation Booth - Dark Gray
Additional Photos:
ClearSonic IsoPac portable isolation booths create a more ideal acoustic space wherever you are, so you can spend less time worrying about acoustics and more time getting great sounding mixes. The isolation booths are the perfect solution to cut down on microphone bleed and environmental noise to achieve quieter volume levels and better mixes for home and studio recording, House of Worship services, and live music venue performances. In addition to drums, they work great for guitar, horn, voice, or any sound source.
The IsoPac A has the largest footprint of any isolation booth we offer and offers substantial sound isolation and volume reduction. Just take a step inside and you will hear and feel the difference. This is achieved by surrounding your drum kit or other sound source with a drum shield and extensive acoustic treatment. The drum shield acts as a sound barrier reflecting sound back into the booth where it can be absorbed by the S2224, S2466x2, and SL8466 Sorber sound absorption baffles. Getting in/out is easy the entry point is on the left or right side where the rear S2466x2 Sorber baffles butt up against the front A2466x7 drum shield, allowing either end panel of the S2466x2 Sorber baffles to act as a door.
All of these isolation booths are modular, portable, and feature full-length, flexible, yet robust plastic hinges that utilize a 'tooth in groove' mechanical lock to securely snap into place for a firm connection between panels, sound absorbing Sorber baffles, and the highest quality 1/4" thick acrylic material to provide a booth that is functional, stable, and aesthetically pleasing.
Please note that all Clearsonic booths have a gap in the rear to promote air circulation and are not 'airtight' or 100% isolated. There is about 3-4' of open space around the rear of the booth to allow for air exchange. If desired, extra pieces can be purchased to further close this gap and provide maximum isolation.
• Great for studio, stage, and House of worship
• Best solution when maximum space is critical
• Cuts down on mic bleed and gives soundperson greater control over the mix
• The front A2466x7 acrylic drum shield, rear S2466x2 free-standing Sorber baffles, top SL8466 Sorber Lid baffles, and inner S2224 Sorber baffles offer extensive sound isolation and absorption
• 128 square feet of sound absorbing Sorber baffles provide exceptional volume reduction of 50-60%
• Cable cutouts allow for easy cable routing to your gear
• 12" H Acrylic Drum Shield Height Extender provides an ample 6.5' of headroom
• 1/4" thick acrylic material provides durability for transporting panels. Creates acoustic separation between instruments on stage or in the studio to cut down on mic bleeding and allows everyone to hear themselves and the mix better. Adds stability that allows for modular set up to support acrylic height extenders and Sorber baffles on top, such as a LidPac, and attachment of Sorber panels, such as the S2224, directly to the acrylic panels with adhesive-backed Velcro.
• Cable cut-outs allows space where each panel meets at the bottom for routing/organizing cables for microphones or any wired gear. Also allows less sound to escape compared to mouse hole cutouts.
• Tooth in groove mechanical lock the hinge tooth locks into the groove cut into each acrylic panel for superior connection and longer life, especially compared to Friction hinge.
• Low profile allows for better aesthetics as hinge blends into the shield better.
• Flexibility hinge bends 180 degrees in one direction and 90 degrees in the other allowing for accordion style folding. This makes it easier to ship, store, and transport, and allows for a more customized shield footprint.
• Velcro-receptive acoustic fabric jacket provides another layer of sound absorption and allows Sorber baffles to attach to acrylic material or other Sorber baffles with Velcro.
• Sewn seams fabric jacket fully covers inner fiberglass. No glue is used and there is no exposed fiberglass.
• Includes S2224 (22" W x 24" H) Sorber baffles, S2466x2 (48" W x 66" H) free-standing Sorber baffles, and SL8466 (84" W x 66" L) Sorber LidPac
• Includes two aluminum telescoping support bars for maximum stability and 6" 2-speed clip-on fan to promote air circulation
• Variable footprint of about 6' W x 7' D x 6.5' H - 50-60% perceived volume reduction
• (1)AX2412x7 7-panel, 12" H acrylic drum shield height extender, provides 6.5' headroom
• (3)S2466x2 free-standing, 2-section rear Sorber sound absorption baffle, each panel measures 24" W x 66" H
• (7)S2224 - 22" W x 24" H Sorber sound absorption baffles
• (1) SL8466 - 84" W x 66"L Sorber sound absorption Lid with aluminum telescoping support bars
• (1) FAN 6" clip-on fan with two speeds
*Please note that the IsoPac has a gap in the rear to promote air circulation and are not "airtight" or 100% isolated
The IsoPac A has the largest footprint of any isolation booth we offer and offers substantial sound isolation and volume reduction. Just take a step inside and you will hear and feel the difference. This is achieved by surrounding your drum kit or other sound source with a drum shield and extensive acoustic treatment. The drum shield acts as a sound barrier reflecting sound back into the booth where it can be absorbed by the S2224, S2466x2, and SL8466 Sorber sound absorption baffles. Getting in/out is easy the entry point is on the left or right side where the rear S2466x2 Sorber baffles butt up against the front A2466x7 drum shield, allowing either end panel of the S2466x2 Sorber baffles to act as a door.
All of these isolation booths are modular, portable, and feature full-length, flexible, yet robust plastic hinges that utilize a 'tooth in groove' mechanical lock to securely snap into place for a firm connection between panels, sound absorbing Sorber baffles, and the highest quality 1/4" thick acrylic material to provide a booth that is functional, stable, and aesthetically pleasing.
Please note that all Clearsonic booths have a gap in the rear to promote air circulation and are not 'airtight' or 100% isolated. There is about 3-4' of open space around the rear of the booth to allow for air exchange. If desired, extra pieces can be purchased to further close this gap and provide maximum isolation.
IsoPac A Features
• Modular and expandable if more room is ever needed• Great for studio, stage, and House of worship
• Best solution when maximum space is critical
• Cuts down on mic bleed and gives soundperson greater control over the mix
• The front A2466x7 acrylic drum shield, rear S2466x2 free-standing Sorber baffles, top SL8466 Sorber Lid baffles, and inner S2224 Sorber baffles offer extensive sound isolation and absorption
• 128 square feet of sound absorbing Sorber baffles provide exceptional volume reduction of 50-60%
• Cable cutouts allow for easy cable routing to your gear
• 12" H Acrylic Drum Shield Height Extender provides an ample 6.5' of headroom
Acrylic Drum Shield Features
• Routered edges provide clean and smooth edge that wont cut your hands.• 1/4" thick acrylic material provides durability for transporting panels. Creates acoustic separation between instruments on stage or in the studio to cut down on mic bleeding and allows everyone to hear themselves and the mix better. Adds stability that allows for modular set up to support acrylic height extenders and Sorber baffles on top, such as a LidPac, and attachment of Sorber panels, such as the S2224, directly to the acrylic panels with adhesive-backed Velcro.
• Cable cut-outs allows space where each panel meets at the bottom for routing/organizing cables for microphones or any wired gear. Also allows less sound to escape compared to mouse hole cutouts.
Hinge Features
• Full-length the hinges run the full length of each acrylic panel. This extra coverage provides superior sound isolation compared to competitors whose hinges leave exposed seams between panels for sound to escape.• Tooth in groove mechanical lock the hinge tooth locks into the groove cut into each acrylic panel for superior connection and longer life, especially compared to Friction hinge.
• Low profile allows for better aesthetics as hinge blends into the shield better.
• Flexibility hinge bends 180 degrees in one direction and 90 degrees in the other allowing for accordion style folding. This makes it easier to ship, store, and transport, and allows for a more customized shield footprint.
Sorber Features
• Proprietary 1.6" thick rigid fiberglass core - provides superior sound absorption compared to acoustic foam and other fiberglass baffles. Allows panels to free stand (S2466x2) or lay on top of an acrylic shield (LidPacs).• Velcro-receptive acoustic fabric jacket provides another layer of sound absorption and allows Sorber baffles to attach to acrylic material or other Sorber baffles with Velcro.
• Sewn seams fabric jacket fully covers inner fiberglass. No glue is used and there is no exposed fiberglass.
Specifications
• Great for studio, stage, and House of Worship• Includes S2224 (22" W x 24" H) Sorber baffles, S2466x2 (48" W x 66" H) free-standing Sorber baffles, and SL8466 (84" W x 66" L) Sorber LidPac
• Includes two aluminum telescoping support bars for maximum stability and 6" 2-speed clip-on fan to promote air circulation
• Variable footprint of about 6' W x 7' D x 6.5' H - 50-60% perceived volume reduction
Parts List:
• (1)A2466x7 7- panel acrylic drum shield, each panel measures 24" W x 66" H• (1)AX2412x7 7-panel, 12" H acrylic drum shield height extender, provides 6.5' headroom
• (3)S2466x2 free-standing, 2-section rear Sorber sound absorption baffle, each panel measures 24" W x 66" H
• (7)S2224 - 22" W x 24" H Sorber sound absorption baffles
• (1) SL8466 - 84" W x 66"L Sorber sound absorption Lid with aluminum telescoping support bars
• (1) FAN 6" clip-on fan with two speeds
*Please note that the IsoPac has a gap in the rear to promote air circulation and are not "airtight" or 100% isolated
Q & A
There are currently no questions for this product.
Reviews
18.117.183.150
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
Its pricey but nice 1 of 1 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Regina, Saskatchewan
The sorber panels really do wonders for sound absorption. The Plexiglas merely reflects the sound inside the booth....the sorber panels is where the magic happens. These booths aren't completely sealed so expect a sound reduction not an actual soundproofing. I've set one of these up in my condo and thus far I've been able to play acoustic guitar and sing quite loudly and have had no complaints from the neighbors...even at 1:00 am.
The overall look is very professional - it doesn't look like its thrown together with a bunch of junk for soundproofing....this is total professional quality.
Only downside is if you had the abilities and the resources....you could actually make this for significantly less then having to import it from Clear Sonic in the US,
All in all, I'm glad I have it.
Posted by Chris Burgess on Sep 17, 2018
IsoPac Booth 0 of 2 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I've heard about it
Closest Store Saint John, New Brunswick
Church application, great reviews from drummers and sound men alike.
Posted by anonymous on May 28, 2014
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| IsoPac A Isolation Booth - Dark Gray | 343054 |
