Opens in a new window
Tannoy 4 inch Active Studio Monitor Speaker (single)
Additional Photos:
Great Additions
Description
BIG MONITOR SOUND, ULTRA-COMPACT DESIGN
Dont be fooled by Reveal 402s compact size. Decades of experience in loudspeaker design and tweaking is the foundation for creating Reveal 402. The result is a massive soundscape generated by the super-efficient 4 woofer and ultra-precise 3/4 tweeter.
EXPERTLY VOICED FOR MASSIVE SWEET SPOT
Custom tweaked by Tannoys in-house speaker guru, Dr. Paul Mills, the active cross-over filters of Reveal 402 have absolutely impeccable timing. This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix as well as invite people to sit in with you during mixing sessions.
EASY SETUP OPTION WITH AUX LINK
If youre anything like us, youre not only working on mixes but also listening to your favorite music! Reveal 402 gives you the ultimate pathway for both. With the Aux Link, setting up has never been easier. Use the included mini jack cable to plug into your favorite music player and link your monitors for an instant stereo setup no need for external interfaces
FEATURES (FRONT)
• 3/4" soft-dome "Poke-Resistant" tweeter
• 4" custom high-efficiency LF woofer
• Accurately tuned front-firing bass port -allows near-wall placement and ensures optimal LF performance
FEATURES (FRONT)
• Balanced and unbalanced inputs for maximum flexibility
• Plug in your phone /tablet for instant listening gratification
• Adjust volume and EQ to match your listening environment
• 50 Watt Bi-Amp module and active crossover filter ensures maximum power and tonal clarity
• Rubber padded base for acoustical isolation
SPECIFICATIONS
General
Frequency Response: 56 Hz -48 kHz
Max SPL101 dB
Membrane Sizes
HF: 3/4˝ Soft Dome (19 mm)
LF/Mid Range: 4 (100 mm)
Bi-amp Output Power, RMS
Power Output: 50 Watts
LF/Mid Range: 25 Watts
HF: 25 Watts
THD: < 0.9 %
Input Types and Impedances
Balanced: XLR, 20 kOhm
Unbalanced 1/4" Jack, 10 kOhm
AUX Link: Mini Jack, 10 kOhm
AUX Link Output: Mini Jack
EQ Options
HF EQ Settings: -1.5 dB HF Cut / Neutral / +1.5 dB HF Boost
Crossover Frequency: 2.5 kHz
Low Frequency Alignment: Optimized Front Port
Cabinet Dimensions
HxWxD, inches: 9.5 x 5.8 x 8.4
HxWxD, mm: 240 x 147 x 212
*Monitors Sold Separately*
Dont be fooled by Reveal 402s compact size. Decades of experience in loudspeaker design and tweaking is the foundation for creating Reveal 402. The result is a massive soundscape generated by the super-efficient 4 woofer and ultra-precise 3/4 tweeter.
EXPERTLY VOICED FOR MASSIVE SWEET SPOT
Custom tweaked by Tannoys in-house speaker guru, Dr. Paul Mills, the active cross-over filters of Reveal 402 have absolutely impeccable timing. This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix as well as invite people to sit in with you during mixing sessions.
EASY SETUP OPTION WITH AUX LINK
If youre anything like us, youre not only working on mixes but also listening to your favorite music! Reveal 402 gives you the ultimate pathway for both. With the Aux Link, setting up has never been easier. Use the included mini jack cable to plug into your favorite music player and link your monitors for an instant stereo setup no need for external interfaces
FEATURES (FRONT)
• 3/4" soft-dome "Poke-Resistant" tweeter
• 4" custom high-efficiency LF woofer
• Accurately tuned front-firing bass port -allows near-wall placement and ensures optimal LF performance
FEATURES (FRONT)
• Balanced and unbalanced inputs for maximum flexibility
• Plug in your phone /tablet for instant listening gratification
• Adjust volume and EQ to match your listening environment
• 50 Watt Bi-Amp module and active crossover filter ensures maximum power and tonal clarity
• Rubber padded base for acoustical isolation
SPECIFICATIONS
General
Frequency Response: 56 Hz -48 kHz
Max SPL101 dB
Membrane Sizes
HF: 3/4˝ Soft Dome (19 mm)
LF/Mid Range: 4 (100 mm)
Bi-amp Output Power, RMS
Power Output: 50 Watts
LF/Mid Range: 25 Watts
HF: 25 Watts
THD: < 0.9 %
Input Types and Impedances
Balanced: XLR, 20 kOhm
Unbalanced 1/4" Jack, 10 kOhm
AUX Link: Mini Jack, 10 kOhm
AUX Link Output: Mini Jack
EQ Options
HF EQ Settings: -1.5 dB HF Cut / Neutral / +1.5 dB HF Boost
Crossover Frequency: 2.5 kHz
Low Frequency Alignment: Optimized Front Port
Cabinet Dimensions
HxWxD, inches: 9.5 x 5.8 x 8.4
HxWxD, mm: 240 x 147 x 212
*Monitors Sold Separately*
Q & A
There are currently no questions for this product.
Reviews
216.73.216.41
0
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
4.0/ 5 3 Reviews
5 StarsUsing as stage monitors - small church
0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Winnipeg (Henderson), Manitoba
We were in need of somewhat discreet stage monitors in a smaller church. XLR input and small size and independent volume control perfectly fit the bill. We run these at 1/3 volume, using mix sends from an A&H QU-24 and the musicians are quite satisfied with the sound. We did need to make custom bases and also chose to raise them off the floor. So far the use of three independent mixes has not yet muddied the room sound (problem we have had on all other monitors)
Two small items: would love to have front grills to protect the speaker cones and perhaps pre-drilled/threaded mount screws. Still unsure if we need more power, but so far they are providing exactly what we hoped for, and independent volume is nice. Once the mix is done, the musicians can easily control max volume if needed as not all have apps for the QU :)
Posted by Neil B on Mar 26, 2023
Neutral sound and good value for money
2 of 2 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Montréal, Quebec
I tried several monitors before buying these, Presonus Eris 4.5, Cerwin Vega XD5, and another Tannoy, Reveal 502.
At first, I liked Presonus and found that they did not colored the entire sound. Then I tried Cerwin Vega and was very disappointed with their midrange. Tannoy 502 were very pleasant but a little bit too expensive for my current needs and budget. Reveal 402 were just what I needed: well balanced sound, no external vibration on the cabinet, quite large sweet spot, very good treble and surprisingly good bass for a 4" speaker. With an acceptable price.
I installed them quite close to my PC monitor and a small hiss can be heard when they are on, but this is forgotten the moment the music start coming through these small but very powerful monitors. They are very, very loud at the distance I use them. Reveal 402 are connected through TRS 1/4" cables to my Focusrite 2i2 and through (supplied) 1/8" cables to my computer's sound card so not only I can monitor my work but listen to my or the reference music directly from my computer, which is very handy.
The only detail I don't like is that all the commands are on the back panel because the speakers are in fact two separated units. So I set the volume to about a quarter of max and control the output either from my Focusrite or PC sound car, depending what I do.
Posted by Michel on Dec 31, 2014
The best so far!!!!
0 of 0 customers found this review helpful
Features
Quality
Value
Overall
Product Experience I own it
Closest Store Oshawa, Ontario
I've use many near field monitor before, but this one is best one i've heard so far.
Posted by Sabio King on Oct 30, 2014
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| 4 inch Active Studio Monitor Speaker (single) | 415574 |
