Opens in a new window
Tone King Royalist Tube Preamp Pedal
Photos additionnelles :
Votre prix: $879.00 CDN
ou à partir de $93 CDN/mo
Complétez votre achat
Description
The Sound of British Rock Royalty - Now on Your Pedalboard
The Royalist Tube Preamp Pedal captures the soul of Tone King's beloved Royalist MKIII amplifier - the company's most authentic take on the golden age of British tone. From the sweet, singing JTM45, through the unmistakable Plexi crunch, to the searing drive of the Super Lead, this high-voltage tri-tube preamp pedal delivers the full spectrum of British rock attitude in a compact, pedalboard-friendly format.
Running on three 12AX7 tubes at proper high voltages, the Royalist Preamp brings the complete touch sensitivity, harmonic bloom, and dynamic punch of the Royalist MKIII amp to your pedalboard. Each of its two independent channels features the amp's FAT switch and three-way 1964/1967/1970 voicing selector, faithfully reproducing the gain structure, tone stack, and feel of the original circuits. Whether you're chasing sparkling cleans, punchy crunch, or molten roar, the Royalist Preamp delivers the unmistakable voice of British rock, anywhere, at any volume.
Three Eras of Iconic British Tone
Each channel of the Royalist Preamp offers its own three-position voicing switch, mirroring the evolution of the British amp sound across decades:
1964 - Smooth top end, lower gain, and a balanced, vintage warmth inspired by early British blues amps.
1967 - Crisp treble response, bold midrange, and the aggressive bite that defined rock's formative years.
1970 - Increased gain and tightness for that unmistakable, high-energy crunch of arena-ready hard rock.
Pair these voicings with each channel's FAT switch option to add body and low-end warmth to single-coil guitars or enhance sustain and punch with humbuckers.
Era Accurate Tone Stacks
The Royalist features two identical channels, each voiced with its own distinct tone stack. The top channel uses a vintage-accurate JTM45 / Bassman / Super Bass inspired EQ. The bottom channel reflects a later-era British Lead tone stack.
While the two channels can be dialed remarkably close, their subtle differences give players two authentic British flavors-one tight and articulate, the other more mid forward.
Built-In Zero Watt Power Amp - Phase Inverter
The Royalist Preamp includes Tone King's "Zero Watt Power Amp," a genuine phase inverter circuit powered by one of its three 12AX7 tubes. This design captures the Royalist's harmonic depth and dynamic interaction between preamp and power stage - a key ingredient of true British tone that most preamp pedals can't replicate. The result is the full experience of an overdriven Royalist power section, without the ear-splitting volume.
Impulse Response (IR) Cabinet & Power Amp Sim
The Royalist Preamp Pedal features Tone King's low-latency IR and power amp simulation engine, offering direct output to FOH, recording interfaces, or headphones with stunning realism. Preloaded with a curated selection of OwnHammer IRs listed below, each channel includes a 3-way IR selector for instant tonal changes.
OH 412 Pinstripe H25: Celestion G12H-25's from 1967 captured in a pinstripe 1982B 4x12 cabinet by Kevin Rowe of OwnHammer using Shure SM57, Telefunken MD421, and Royer 121 microphones through mid-late 1970's API 312 preamps.
OH 112 Imperial TK1660: Tone King 1660 captured in a Tone King Imperial 1x12 combo by Kevin Rowe of OwnHammer using Shure SM57, Neumann U87, and Royer 121 microphones through mid-late 1970's API 312 preamps.
OH 412 M75BB: 16-ohm, 1777 cone Celestion "black back" G12M-75's from 1975 captured in a 412 cabinet by Kevin Rowe of OwnHammer using Shure SM57 and Sennheiser MD421 microphones through mid-late 1970's API 312 preamps.
There are 20 IRs to choose from in the included Tone King Editor software (powered by Synergy) which are easy to swap in and out of the pedal's six available slots. You can also disengage the onboard IR loader entirely to use the preamp with an external IR loader or powered cabinet.
Tone King Editor Software - Deep Control, Modern Flexibility
The included Tone King Editor software unlocks deep editing capabilities for digital parameters. Save and recall up to 128 presets via MIDI, assign IRs per channel, fine-tune HF and LP filters, and configure reverb, or FX loop assignments - all in one intuitive interface.
Expanding Your Rig
The Royalist Preamp Pedal is equally at home on stage, in the studio, or integrated with your favorite amp.
Add Channels to Your Amp
Use the 3-cable method with any amp that has a series effects loop to instantly add two channels of British tube tone to your existing rig.
Combine with Other Preamps
Link multiple effects-loop-equipped preamp pedals to build an ultimate hybrid system. Assign the Royalist's IRs and power amp emulation to other preamps, or route its reactive output into a separate power amp and cabinet for the real-air experience.
The Sound of British Heritage, Reborn for the Modern Player
From the club stages of the '60s to the arenas of the '70s, the sound of British rock has defined generations of guitar tone. Now, with the Royalist Tube Preamp Pedal, that legacy lives on - delivering the roar, chime, and harmonic richness of those legendary amplifiers in a compact, high-voltage, pedalboard-ready design.
• 3 x 12AX7 preamp tubes running at proper high voltages
• Built-In zero-watt power amp - phase inverter circuit
• Three-way 1964/1967/1970 voicing switch per channel
• Reverb control (assignable to each channel)
• Stereo, Series FX loop (bypassable)
• MIDI programmable
• Save up to 128 presets for instant recall via an external MIDI switcher
• Onboard Impulse Response (IR) Technology
• Power amp simulation with software editable HF Comp, Low-Pass and High-Pass filters (per channel)
The Royalist Tube Preamp Pedal captures the soul of Tone King's beloved Royalist MKIII amplifier - the company's most authentic take on the golden age of British tone. From the sweet, singing JTM45, through the unmistakable Plexi crunch, to the searing drive of the Super Lead, this high-voltage tri-tube preamp pedal delivers the full spectrum of British rock attitude in a compact, pedalboard-friendly format.
Running on three 12AX7 tubes at proper high voltages, the Royalist Preamp brings the complete touch sensitivity, harmonic bloom, and dynamic punch of the Royalist MKIII amp to your pedalboard. Each of its two independent channels features the amp's FAT switch and three-way 1964/1967/1970 voicing selector, faithfully reproducing the gain structure, tone stack, and feel of the original circuits. Whether you're chasing sparkling cleans, punchy crunch, or molten roar, the Royalist Preamp delivers the unmistakable voice of British rock, anywhere, at any volume.
Three Eras of Iconic British Tone
Each channel of the Royalist Preamp offers its own three-position voicing switch, mirroring the evolution of the British amp sound across decades:
1964 - Smooth top end, lower gain, and a balanced, vintage warmth inspired by early British blues amps.
1967 - Crisp treble response, bold midrange, and the aggressive bite that defined rock's formative years.
1970 - Increased gain and tightness for that unmistakable, high-energy crunch of arena-ready hard rock.
Pair these voicings with each channel's FAT switch option to add body and low-end warmth to single-coil guitars or enhance sustain and punch with humbuckers.
Era Accurate Tone Stacks
The Royalist features two identical channels, each voiced with its own distinct tone stack. The top channel uses a vintage-accurate JTM45 / Bassman / Super Bass inspired EQ. The bottom channel reflects a later-era British Lead tone stack.
While the two channels can be dialed remarkably close, their subtle differences give players two authentic British flavors-one tight and articulate, the other more mid forward.
Built-In Zero Watt Power Amp - Phase Inverter
The Royalist Preamp includes Tone King's "Zero Watt Power Amp," a genuine phase inverter circuit powered by one of its three 12AX7 tubes. This design captures the Royalist's harmonic depth and dynamic interaction between preamp and power stage - a key ingredient of true British tone that most preamp pedals can't replicate. The result is the full experience of an overdriven Royalist power section, without the ear-splitting volume.
Impulse Response (IR) Cabinet & Power Amp Sim
The Royalist Preamp Pedal features Tone King's low-latency IR and power amp simulation engine, offering direct output to FOH, recording interfaces, or headphones with stunning realism. Preloaded with a curated selection of OwnHammer IRs listed below, each channel includes a 3-way IR selector for instant tonal changes.
OH 412 Pinstripe H25: Celestion G12H-25's from 1967 captured in a pinstripe 1982B 4x12 cabinet by Kevin Rowe of OwnHammer using Shure SM57, Telefunken MD421, and Royer 121 microphones through mid-late 1970's API 312 preamps.
OH 112 Imperial TK1660: Tone King 1660 captured in a Tone King Imperial 1x12 combo by Kevin Rowe of OwnHammer using Shure SM57, Neumann U87, and Royer 121 microphones through mid-late 1970's API 312 preamps.
OH 412 M75BB: 16-ohm, 1777 cone Celestion "black back" G12M-75's from 1975 captured in a 412 cabinet by Kevin Rowe of OwnHammer using Shure SM57 and Sennheiser MD421 microphones through mid-late 1970's API 312 preamps.
There are 20 IRs to choose from in the included Tone King Editor software (powered by Synergy) which are easy to swap in and out of the pedal's six available slots. You can also disengage the onboard IR loader entirely to use the preamp with an external IR loader or powered cabinet.
Tone King Editor Software - Deep Control, Modern Flexibility
The included Tone King Editor software unlocks deep editing capabilities for digital parameters. Save and recall up to 128 presets via MIDI, assign IRs per channel, fine-tune HF and LP filters, and configure reverb, or FX loop assignments - all in one intuitive interface.
Expanding Your Rig
The Royalist Preamp Pedal is equally at home on stage, in the studio, or integrated with your favorite amp.
Add Channels to Your Amp
Use the 3-cable method with any amp that has a series effects loop to instantly add two channels of British tube tone to your existing rig.
Combine with Other Preamps
Link multiple effects-loop-equipped preamp pedals to build an ultimate hybrid system. Assign the Royalist's IRs and power amp emulation to other preamps, or route its reactive output into a separate power amp and cabinet for the real-air experience.
The Sound of British Heritage, Reborn for the Modern Player
From the club stages of the '60s to the arenas of the '70s, the sound of British rock has defined generations of guitar tone. Now, with the Royalist Tube Preamp Pedal, that legacy lives on - delivering the roar, chime, and harmonic richness of those legendary amplifiers in a compact, high-voltage, pedalboard-ready design.
Features
• Two Channel High-Voltage preamp - DI• 3 x 12AX7 preamp tubes running at proper high voltages
• Built-In zero-watt power amp - phase inverter circuit
• Three-way 1964/1967/1970 voicing switch per channel
• Reverb control (assignable to each channel)
• Stereo, Series FX loop (bypassable)
• MIDI programmable
• Save up to 128 presets for instant recall via an external MIDI switcher
• Onboard Impulse Response (IR) Technology
• Power amp simulation with software editable HF Comp, Low-Pass and High-Pass filters (per channel)
Q et R
There are currently no questions for this product.
Avis
Il n'y a actuellement aucun commentaire sur ce produit.
Protégez votre investissement avec la Garantie de fiabilité Long & McQuade.
Une bonne garantie est souvent un facteur décisif au moment d’un achat. Étant donné qu’une réparation peut être très dispendieuse, les manufacturiers n’offrent en général qu’une protection limitée d’un an couvrant seulement les défauts de fabrication. Lors d’une acquisition aussi importante que celle d’un instrument de musique ou d’une pièce d’équipement, vous voudrez avoir l’assurance que votre achat sera protégé de façon adéquate.
C’est pourquoi Long & McQuade offre une année GRATUITE de sa Garantie de fiabilité sur la plupart de ses produits. Cette couverture, qui bonifie celle du fabricant, vous procurera la tranquillité d’esprit que vous recherchez.
En quoi la garantie Long & McQuade se distingue-t-elle de celles des autres fabricants?
- Fiabilité assurée : l’usure normale de certaines pièces est couverte. Le produit fonctionnera aussi bien qu’au premier jour pour toute la durée de la protection. Pour les instruments d’orchestre, nos techniciens et techniciennes évalueront la nécessité d’effectuer un nettoyage en profondeur, un remplacement de tampons ou un nettoyage à ultrasons. Ces services ne sont pas offerts systématiquement dans le cadre de la Garantie de fiabilité.
- Possibilité de remplacement : si votre produit est irréparable ou coûte trop cher à remettre en état, nous l’échangerons contre un modèle identique ou équivalent, sans frais supplémentaires. Si ce n’est pas possible, nous vous accorderons un remboursement complet.
- Politique anticitron : si votre article présente un problème récurrent, nous le remplacerons.
- Accessibilité : vous pouvez vous prévaloir de votre garantie dans n’importe quelle succursale Long & McQuade.
- Réglage de guitare : une mise au point gratuite est incluse à l’achat de toute guitare neuve ou d’occasion.
- Prêt de matériel : un produit de rechange peut être mis à votre disposition pendant la réparation de votre article.
- Survoltage couvert : l’appareil est garanti même s’il est endommagé par une surtension.
- Assurance-accessoires : tous les accessoires fournis avec le produit (pédale, étui, etc.) sont couverts.
- Usage commercial approuvé : l’équipement acheté pour une utilisation intensive bénéficie aussi de cette protection.
Long & McQuade se réserve le droit de limiter l’achat d’années additionnelles. Les produits d’occasion sont protégés par la Garantie de fiabilité pour une durée de trois mois. Certains articles (logiciels, cymbales, etc.) sont couverts uniquement par la garantie du fabricant. Les biens non durables (cordes, anches, baguettes, piles, tubes, etc.) sont exclus, tout comme les dommages accidentels, la détérioration esthétique et les problèmes causés par l’humidité ou la température. Les haut-parleurs endommagés par un usage excessif ne sont généralement pas couverts. Notre garantie ne compense pas la perte de jouissance. A partir de juin 2018, la garantie de performance n'est plus transférable. Valide seulement au Canada.
Achat d’années additionnelles de garantie
Certains fabricants offrent une garantie de plus d’un an, mais qui est en général limitée et moins avantageuse que la nôtre. Lorsque c’est le cas, la prolongation de notre protection vous sera tout de même profitable, du fait qu’elle est plus complète et pratique.
Vous pouvez acheter des années supplémentaires de notre protection si vous souhaitez en profiter plus longtemps. Les tarifs sont les suivants :
- Produits NEUFS : à partir de 4 % du prix actuel de l’article à l’état neuf par année supplémentaire.
- Produits D’OCCASION : à partir de 4 % du prix actuel de l’article à l’état neuf pour passer initialement de trois mois à un an. À partir de 4 % pour chaque année de plus.
- Guitares : 4 % du prix actuel de l’article à l’état neuf pour passer d’un an à deux. 4 % pour chaque année de plus. Tarif maximum de 45 $. Une mise au point gratuite supplémentaire n’est pas incluse avec l’achat d’années de couverture additionnelles.
- Instruments d’orchestre : 4 % du prix actuel de l’article à l’état neuf pour passer d’un an à deux. 4 % pour chaque année de plus.
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Royalist Tube Preamp Pedal | 837795 |
