Reloop Flux Go USB-C DVS Interface
Additional Photos:
Related Products
Description
With dual stereo inputs and outputs, a bus-powered USB-C cable for power and audio transmission, and a ground connection for turntables, the Flux Go provides DJs with everything they need for a professional DVS setup.
Features
• Pocket-sized USB-C DVS audio interface for Serato DJ Pro• Studio-grade 24-bit/96 kHz sound card with excellent audio and ultra-low latency
• 4x4 In/Out audio interface with headphone connection turns any mixer into a DVS system
• 2-channel (4x4 In/Out) USB-C DVS interface for Serato DJ Pro
• Turn any mixer into a professional digital vinyl system
• Unlocks full version of Serato DJ Pro and Serato DVS
• Studio-grade 24-bit class-compliant sound card with crystal-clear audio and ultra-low latency response
• Supports up to 96 kHz with high-quality D/A converters for excellent audio processing
• Plug 'n' Play for macOS systems and for other devices with USB-C (class-compliant), ASIO driver available for Windows
• Doubles as a Plug 'n' Play USB soundcard to play any system audio through the 3.5 mm headphone jack and RCA output simultaneously
• Convenient headphone volume control on the side panel
• Also functions as a studio interface for recording and playback of audio in any 3rd party audio software
• 2 inputs for turntables or CD/Media players, switchable in any combination via dedicated DIP switches
• 2 line outputs for connecting a mixer
• Dedicated GND terminal for grounding turntables
• Gold-plated, corrosion-resistant audio connections
• USB-C bus-powered cable connection for power and audio
• Power LED on the side panel for connection status
• Lightweight and ultra-compact with sturdy housing design for reliability on the go
• Extended edge design to protect connection terminals
Specifications
USB audio interface with 24-bit / 44.1 kHz, 48 kHz, 96 kHzClass-compliant
USB 2.0 high-speed
Power Supply: DC 5 V / 500 mA (USB-C)
S/N Ratio (1 kHz reference input level, with A-w/20 kHz LPF, input short when no signal):
Line input at +9 dBV, nominal 116 dB, limited 113 dB,
Phono input at -23 dBV, nominal 97 dB, limited 94 dB
THD + N (1 kHz reference input level, headphone volume to min, with A-w/(20 kHz LPF):
Line input at 0 dBV, nominal 0.007%, limited 0.015%,
Phono input at -32 dBV, nominal 0.015%, limited 0.03%
Maximum Gain (Input 1 kHz / -50 dBV in Line mode, then reference to Phono mode):
Phono internal gain +32 dB, nominal +/- 0.5 dB, limited +/- 1 dB
Maximum Input (1 kHz input level to output level less than 1% T.H.D, with A-w/20 kHz LPF):
Line input at +9 dBV, nominal +9 dBV, limited +8 dBV
Phono input at -23 dBV, nominal -23 dBV, limited -24 dBV
Maximum Output (1 kHz input level to output level less than 1% T.H.D, headphone volume to max, with A-w/20 kHz LPF):
Line 10K OHM / +9 dBV, nominal +9 dBV, limited +8 dBV
Phones 32 OHM / +3 dBV, nominal +3 dBV, limited +2 dBV
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Flux Go USB-C DVS Interface | 838270 |
